Scope of application:

The BZ series packaging machine is suitable for quantitative packaging of various powder materials, such as meal replacement powder, seasonings, fish bait, flour, pesticides, veterinary drugs, disinfectants, laundry detergent, milk powder, etc.

Advantages and Characteristics:

1. Microcomputer control, accurate quantification, adjustable parameters, with automatic error correction function

2. The filling components have high processing accuracy, good interchangeability, and reasonable grading,

3. Modular design, flexible combination, can be equipped with automatic feeding device, bagging device, leak proof device and special raw material components according to needs

4. Rolling bearings have minimal wear, no interference from strong and weak electrical circuits, high reliability, and a wide range of applications

5. The body is designed entirely of stainless steel, which is corrosion-resistant and suitable for most raw materials, with a longer service life.

Adopting feedback weighing mode:

The working principle of this machine is constant volume feeding and static weighing feedback. It adopts a unique motor to set the packaging specifications. The motherboard computer calculates the feeding signal based on the set weight and completes the filling process at high speed in one go. After filling, the bag containing the material is placed on the weighing feedback table, and the computer reads the corresponding weighing value and compares it with the theoretical value for feedback adjustment. The next feeding will be based on the corrected value in this feedback. and so on. This measurement mode is suitable for packaging specifications of 5g-500g materials with an error accuracy of up to 1/100 (note: seasoning samples).

Introduction to the main components of this machine:

The main motor adopts a high torque special motor: a customized high torque three-phase stepper motor different from ordinary hybrid stepper motors.

The mixing motor is an imported motor: The mixing motor adopts an imported motor with low noise, long service life, and maintenance free.

The hopper adopts an open type semi transparent stainless steel: it is convenient to observe the material level status in the hopper and easy to clean. Plastic, stainless steel, and open type hoppers can be selected according to the properties of the materials.

2017 Latest Exclusive Highlights:

The mixing motor control and feeding control of this machine are intelligently controlled by a program using a controllable silicon drive module.

Traditional: The start stop button controls the contactor to pull in and control the motor action. The mechanical contacts of the contactor have a service life, but arcing occurs during conduction and cannot be started frequently.

★ The mixing working state can be freely switched according to the material characteristics without installing any components.

Traditional: Unable to achieve switching or require the installation of other components and switching buttons, with multiple sets of circuits attached, which is not conducive to safety and maintenance.

The reaction time of material level control can be adjusted according to the characteristics of the material;

Traditional: Fixed reaction time, for some materials with poor or no sensing ability, inaccurate control of material level.

★ Add synchronized vibration interface control for bagging, and the vibration time can be set arbitrarily according to the loading amount.

Traditional: Without this function, some lighter materials require workers to constantly shake the bag, increasing labor intensity or making packaging impossible.

Equipment principle characteristics:

1. This powder packaging machine integrates machine, electricity, light, and instrument, controlled by a microcontroller, and has functions such as automatic quantification, automatic filling, and automatic adjustment of measurement errors

2. Fast speed: using spiral cutting and light control technology

3. Wide packaging range: The same quantitative packaging machine can adjust and replace different specifications of cutting screws continuously within 5-5000g through an electronic scale keyboard

4. Wide applicability: Powder like materials with certain fluidity can be used. Suitable for various packaging containers such as bags, cans, bottles, etc. Powder quantitative packaging

5. High precision: using stepper motor and electronic weighing technology

6. Errors caused by changes in material density and level can be automatically tracked and corrected

7. The parts in contact with the material are made of stainless steel, which is easy to clean and prevents cross contamination

8. Configurable feeding device, more convenient for users to use

9. Photoelectric switch control, only manual bagging is required, the bag opening is clean and easy to seal