The clamping of the machine tools manufactured by our companyhydraulic systemThe feature includes a vane pump, an overflow valve, a filter, an electromagnetic directional valve, and a clamping hydraulic cylinder. The vane pump is sequentially connected to the overflow valve and the filter, and the filter is connected to each electromagnetic directional valve. The electromagnetic directional valve is connected to the corresponding circuit clamping hydraulic cylinder, and the clamping hydraulic cylinder is set on the machine tool guide rail. Compared with existing technology, the beneficial effect of this utility model is that the hydraulic components have better mechanical power and transmission performance, ensuring the clamping effect of the machine tool. Because the separate air source equipment is removed, it can save a lot of maintenance costs.

Technical requirements for hydraulic system of machine tool clamping:

1. Before assembly, all components need to be sorted and cleaned thoroughly

2. Assemble when conditions permit, and tighten all fasteners without any looseness during assembly.

3. The length can be customized according to specific customer needs or based on on-site craftsmanship.

4. Unqualified products must be strictly controlled and not assembled.

5. After assembly, the overall appearance is beautiful and clean.

Technical Specifications:

1. Pressure: P=16MPa

2、 流量： Q1=60L/min， Q2=4L/min

3. Motor power: N=1.5KW

4. Electromagnetic valve voltage: AC220V

5. Dimensions: 450X33X350

6. Net fuel tank capacity: 30L

7. Working medium oil: 46 # anti-wear hydraulic oil

8、 油液工作温度：65#以下

9. Output port: M16X1.5

10. Oil drain port: M14X1.5

11. Machine color: Blue

label:hydraulic systemProduct Series

Related links:hydraulic technologyAfter sales maintenance

本文地址： http://www.shziying.com/product/product289.html