QSC-2 Automotive Interior Material Combustion Tester

1Scope of use

The combustion tester for automotive interior materials is mainly used to qualitatively evaluate the combustibility of automotive interior materials. Suitable for research, production, and quality inspection departments of various types of automotive interior material manufacturers and their material components, as well as for industries such as insulation materials, engineering plastics, or other solid combustible materials.

IIWorking conditions and main technical indicators

2.1 Environmental temperature: -5℃-30 ℃.

2.2 Relative humidity:≤85%.

2.3 Power supply voltage: 220V+10%、50HZ, Power: 100W.

2.4 Gas source: Liquefied Petroleum Gas

2.5 Instrument dimensions: 590mm * 210mm * 460mm.

2.6 Stopwatch Accuracynot less than0.5s 。

2.7 Apply flame to the sample for 15 seconds using a burner (i.e. burner).

2.8 Bensheng Lamp Inner Diameter 9.5mm+0.1mmm，Approximately 100mm in length.

2.9Test inclination angle: The Bunsen burner burns vertically at 90 ° towards a horizontally placed sample

2.10Flame height: adjustable from 20mm ± 2mm to 100mm ± 2mm (generally adjusted to 38mm)

2.11Flame application time: adjustable from 0-99.9s ± 0.1s (generally selected as 15s)

2.12 Continuation time:0-999.9s±0.1s，Observe the flame to manually start and pause after reaching the first marking line

2.13Combustion gas: liquefied petroleum gas or coal gas

2.14Temperature range: 0-200 ℃ (displays the internal temperature of the working room under test conditions)

IIIEquipment Composition

1. Automatic ignition control system

2. Experimental process: Experimental procedureautomaticcontrol

3. automaticIntake and exhaust system(Gas automatic on/off)

4. Timing system: combustion timer, residual flame timer

5. U-shaped bracket: The upper bracket has 6 pin holes, and the lower bracket corresponds to 6 pins, and is equipped with heat-resistant metal support wires with a diameter of 0.25mm and a spacing of 25mm

6. The distance between the third marking of the test bracket and the second marking is 154mm

7. Heat resistant metal wire groove 0.5mmX0.5mm spacing 25mm

8. The length of the metal wire is greater than 110mm, with 7-8 smooth circular teeth every 25mm

9. Temperature digital display, measuring range 0-200 ℃

10. Flame ruler accuracy: 0.1mm

4packing list

(1) 1 host

(2) 1 set of U-shaped sample clamp

(3) One gas source pipe

(4) 1 power cord

(5) 1 flame ruler

(6) 1 copy of instruction manual

(7) 1 certificate of conformity

5Design standards

GB8410-2006

The simulated combustion performance safety test items specified in standards such as FMVSS 571.302

DIN7520 "Combustion Characteristics of Automotive Interior Materials"

TL1010Combustion characteristics of automotive interior materials

Compliant with standards:GM6090M、DIN75200、GM9070P、FMVSS 302、JIS D 1201、JASO M403 、ISO 3795、ASTM D5132、QB／T 2729-2005