VIP member
Air conditioning round cabinet machine trademark front and rear servo running table hot stamping machine
Specification parameters and configuration requirements for single pressure running table hot stamping machine Project parameter notes Control system
Product details
Specification and configuration requirements for single pressure running table hot stamping machine
project |
parameter |
notes |
control system |
PLC touch screen control |
|
Heating plate size |
380mm×250mm |
total power3000W，Hole size70x50mmM6 |
before and afterRunway itinerary |
0--500mm |
Servo motor drive for running the treadmill forward and backward |
Height range between platform and hot stamping plate |
100—450mm |
Require smooth manual adjustment |
Hot stamping cylinder diameter and stroke |
80*80mm |
|
Hot stamping cylinder with adjustable stroke up and down |
50mm |
|
Size from the center of the hot plate to the edge of the column |
500mm |
|
maximum temperature |
0-280℃ |
Temperature adjustable |
Hot stamping pressure |
250KGF |
|
Maximum hot stamping speed |
600 times/H |
Automatic operation speed without load |
Repetitive hot stamping accuracy |
±0.1mm |
|
Accuracy of entering and exiting the platform |
±0.1mm |
|
power supply |
220V/50Hz |
|
Gas source |
0.5-0.8Mpa |
|
Work platform size |
950 (left and right) * 550 (front and back) mm |
|
The height of the tooling platform table above the ground |
800mm |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-