&The DEPOLOX 3 Plus residual chlorine analyzer produced by W&T company can continuously measure only chlorine and total chlorine (complexes) in drinking water Adopting proven and widely used current measurement techniques The analyzer can directly measure the residual chlorine content and provide an isolated 4-20mA output signal for controlling or recording the process At the same time, it includes an integral alarm relay, and the analyzer can also provide a dual input component to measure pH or fluorine while measuring chlorine gas.

technical parameter
Chlorine measurement
Measurement range: 0-0.2, 0-0.5, 0-0.2, 0-1.0
&Nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp 0-2.0, 0-5.0, 0-10.00-20.0 mg/L (free chlorine or total chlorine)
Accuracy: 0.01mg/L or 2% of full scale, whichever is greater
Sensitivity: 0.01mg/L or 1% of full scale, whichever is higher
Repeatability: 0.01mg/L or 2% of full scale, whichever is greater
Sample water: continuous input
Reflection time: Total chlorine: 90% change, less than 5 minutes
&Nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp Free chlorine: 90% change, less than 20 seconds
Sample water requirements:
Water quality: suitable for drinking water
Import pressure: 2~60psi
Export pressure: 0psi