VIP member
Digital display blower drying oven, digital display blower drying oven, electric heating blower drying oven, electric heating blower drying oven
Product Description Structure: The outer shell of this type of drying oven is made of thin steel plate, and the outer surface is repainted. The space
Product details
| Product Description | |
| Structure: The outer shell of this type of drying oven is made of thin steel plate, and the outer surface is repainted. The space between the outer shell and the inner liner is filled with aluminum silicate fibers to form a reliable insulation layer. Two sets of heaters are installed at the bottom of the studio, with one set of heaters having a separate switch to manage power on/off. The 101A model is equipped with a blower, while the 202B model has no blower. Usage and precautions: 1. This type of oven should work indoors and be installed smoothly. 2. The power input should be equipped with a front-end on/off switch and properly grounded. 3. After checking the power supply, voltage, and power wiring for correctness, it can be powered on for use. 4. When newly purchased or stored for a long time, it is recommended to first bake at a low temperature of 80-100 ℃ for two hours before starting to raise the temperature to facilitate moisture leakage, enhance performance, and extend the life of the ceramic parts. 5. The thermal sensor probe for instrument temperature control should be inserted into the working chamber from the temperature measuring hole on the left side of the circuit, and should not be inserted from the center hole of the air valve on the top of the box to avoid affecting its use. 6. When using this drying oven for the first time, please observe it carefully to avoid overheating and damaging the workpiece, which may cause losses. 7. If you feel a slight increase in thermal inertia during use, you can turn off a set of heaters to reduce the heating power and prevent overheating caused by excessive inertia. 8. Take in the baking object: Do not hit the temperature controller part that extends into the studio to prevent damage to the temperature controller and malfunction. 9. Avoid baking explosive, flammable, and volatile materials in this box to prevent explosions. 10. If there is a malfunction, please have a professional electrician repair it. 11. When leaving the factory, there are two shelves in the studio, one manual, and one certificate of conformity |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-