Name: Dongguan manufacturer joint bearings SAT/K series SA5T/K bearings SA6T/K bearings SA8T/K bearings SA10T/K bearings SA12T/K bearings
Brand: Dongguan Kentie Bearing Co., Ltd
Availability: InStock

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

18925723346
Address

Huatai Technology Park, Xiegang Town, Dongguan City, Guangdong Province, China

Contact Now

Dongguan manufacturer joint bearings SAT/K series SA5T/K bearings SA6T/K bearings SA8T/K bearings SA10T/K bearings SA12T/K bearings

Compared to rolling bearings, joint bearings have a simpler structure and are usually used for low-speed swinging movements. They can withstand larger

Contact Supplier

More Products

Product details

External thread assembly type self-lubricating rod end joint bearing SA... T/K

It is a type of sliding bearing mainly used for low concentricity requirements, high working surface pressure, and slow swinging and rotating motion, with a certain axial limit capability.

Characteristics of Joint Bearings

1) Joint bearings consist of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface, without rolling elements or retainers. Due to the relative sliding between the inner and outer spherical surfaces, their internal friction coefficient is much higher than that of rolling bearings. Generally used in mechanisms that swing at lower speeds or perform tilting movements (centering movements) within a certain angle range.

2) It can withstand combined loads mainly consisting of large radial loads, but its allowable working speed is generally very low.

3) Has a certain axial limit capability, allowing for significant relative skewness between the curve of the shaft and the housing hole.

model	Dimensions (mm)											rotate torque	Load kN		Radial clearance (mm)	weight
	Dimensions (mm)											Nm	Load kN			≈kg
	D tolerance	B	dk	C1	d2	G	h	L1	L2	r1s	a°	max	动 Load ratings kN/Dynamic	静 Load ratings kN/Static
	H7	-0.12	dk	max	max	6g	h	min	max	min	≈		动 Load ratings kN/Dynamic	静 Load ratings kN/Static
SA5T/K	5	8	11.112	6	18	M5	33	19	42	0.3	13	0.2	5.7	6	0～0.032	0.013
SA6T/K	6	9	12.7	6.75	20	M6	36	21	46	0.3	13	0.25	7.2	7.65	0～0.032	0.015
SA8T/K	8	12	15.88	9	24	M8	42	25	54	0.3	14	0.3	11.6	12.9	0～0.032	0.034
SA10T/K	10	14	19.05	10.5	28	M10	48	28	62	0.6	13	0.4	145	18	0～0.032	0.071
SA12T/K	12	16	22.23	12	32	M12	54	32	70	0.6	13	0.5	17	24	0～0.032	0.11
SA14T/K	14	19	25.4	13.5	36	M14	60	36	78	0.6	16	0.6	24	31	0～0.04	0.13
SA16T/K	16	21	28.58	15	42	M16	66	37	87	0.6	15	0.7	285	39	0～0.04	0.22
SA18T/K	18	23	31.75	16.5	44	M18×1.5	72	41	94	0.6	15	0.8	425	475	0～0.04	0.29
SA20T/K	20	25	34.93	18	50	M20×1.5	78	45	103	0.6	14	1	425	57	0～0.04	0.36
SA22T/K	22	28	38.1	20	54	M22×1.5	84	48	111	0.6	15	1.2	57	68	0～0.05	0.49
SA25T/K	25	31	42.86	22	60	M24×2	94	55	124	0.6	15	1.2	68	85	0～0.05	0.65
SA28T/K	28	35	47.63	24	66	M27×2	103	62	136	0.6	15	1.2	86	107	0～0.05	0.87
SA30T/K	30	37	50.8	25	70	M30×2	110	66	145	0.6	17	1.2	88	114	0～0.05	1.1
SA35T/K	35	43	57.1	28	81	M36×2	140	85	180.5	0.6	16	1.2	101	206	0～0.05	1.64
SA40T/K	40	49	66.6	33	91	M42×2	150	90	195.5	0.6	17	1.2	124	286	0～0.05	2.4
SA50T/K	50	60	82.5	45	117	M48×2	185	105	243.5	0.6	12	1.2	308	485	0～0.05	4.8

*If it is a left-hand thread, the bearing model and thread markings should be marked with "L" and "left", for example: SAL8T/KM8 left-6s

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content