VIP member
EJA130 high static pressure differential pressure transmitter
EJA130A high static pressure differential pressure transmitter Yokogawa EJA130A high static pressure differential pressure transmitter is used to meas
Product details
EJA130A high static pressure differential pressure transmitter
YokogawaEJAThe 100A high static pressure differential pressure transmitter is used to measure the liquid level, density, and pressure of liquids, gases, and vapors, and then convert them into 4-20mA current signals for output. EJA130A can also communicate with each other through the BRAN controller, CENTUM CS/μ XL, or Rosemount HART475 controller for setting and monitoring purposes.
Specification of EJA130A
| EJA130A high static pressure differential pressure transmitter | |||
| M membrane box | H membrane box | ||
| measurement range | -100~100kPa (-400~400inH2O) |
-500~500kPa (-2000~2000inH2O) |
|
| Measurement range | 1~100kPa (4~400inH2O) |
5~500kPa (20~2000inH2O) |
|
| precision | ±0.065% | ±0.065% | |
| Protection level | IP67，NEMA 4X, And JIS C0920 immersion proof type | ||
| Explosion proof specifications | FM，CENELEC ATEX，CSA，IECEx | ||
| output signal | 4~20mA DC or FOUNDATION fieldbus or PROFIBUS PA two-wire digital communication | ||
| power supply | BRAN and HART: 10.5~42V DC (intrinsic safety type: 10.5~30V DC) Fieldbus: 9~32V DC (Intrinsic Safety Entity Mode 9~24V DC, Intrinsic Safety FISCO Mode 9~17.5V DC) |
||
| ambient temperature | -40-85 ℃ (-40~185 ℉) (ordinary type) -30~80 ℃ (-22~176 ℉) (with built-in indicator) |
||
| process temperature | -40-120 ℃ (-40~248 ℉) (ordinary type) | ||
| Maximum working pressure | 32MPa (4500psi) | ||
| install | 2-inch pipe installation | ||
| Material of liquid receiving components | Capsule | SUS316L (diaphragm: Hastelloy C-276) | |
| Container flange | SUS316 | ||
| shell | Aluminum alloy or SUS316 stainless steel (optional) | ||
Specification of EJA130A
Basic specification code: EJA130A-DMS5A-92NN
| Item 1: Output signal |
|
||||||||||||||||
| Item 2: Measurement range (membrane box) |
|
||||||||||||||||
| Item 3: Material of the liquid receiving part |
|
||||||||||||||||
| Item 4: Process Interface |
|
||||||||||||||||
| Item 5: Material of bolts and nuts |
|
||||||||||||||||
| Item 6: Installation Method |
|
||||||||||||||||
| Item 7: Electrical Interface |
|
||||||||||||||||
| Item 8: Hidden Display Table |
|
||||||||||||||||
| Item 9: Installing the bracket |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-