ESS Rapid Temperature Change Test Chamber JX-RTP-634L

The rapid temperature rise and fall test chamber is widely used as a simulation environment testing equipment in various industries. It can simulate the changes in temperature and humidity in the natural environment and maintain a constant temperature and humidity. The rapid temperature change test chamber has a significant feature in temperature variation, which is that the temperature rises and falls quickly, and can rise and fall linearly throughout the entire process. For customers who have this requirement, a rapid temperature rise and fall test chamber is a good choice.Suitable for adaptability testing and stress screening testing of instruments, meters, electrical and electronic components, finished products, semi-finished products, semiconductors, chemicals, materials and other environmental testing equipment and components under rapid or gradual temperature changes, in order to analyze and evaluate the performance and behavior of the test samples under the proposed conditions (rapid changes)

1. Reasonable structure, fast heating speed;

2. Network speed variable frequency regulation;

3. Imported manufacturing units and key components are all imported from international famous brands to improve operational reliability;

4. Touch screen, user-friendly human-machine interface, easy to operate, and easy to maintain;

5. There are protection functions for studio overheating, compressor overload, overpressure, oil pressure, fan overload, phase loss, compressor delay, etc.

6. Liquid nitrogen cooling can reach 30 ℃/min

1. GB10592-89 Technical Conditions for High and Low Temperature Test Chamber

2. GB2423.1-1989 Low temperature test method

3. GB2423.2-1989 High temperature test method

Control System Balance Temperature and Humidity Control System

Temperature range -40 ℃~150 ℃

Heating time: It takes about 10 minutes for the temperature to rise from -40 ℃ to 150 ℃ (when unloaded, the non-linear heating rate is about 20 ℃/min)

Cooling time: It takes about 10 minutes to drop from+150 ℃ to -40 ℃ (when unloaded, the non-linear cooling rate is about 20 ℃/min)

Temperature fluctuation ± 0.5 ℃

Temperature deviation ± 3.0 ℃

Inner box size: W750 * H1300 * D650mm

Temperature change rate (℃/min) 5,10,15.20

Inner box material SUS304 high-grade stainless steel

Outer box material: Steel plate with electrostatic spraying surface treatment or SUS304 high-grade stainless steel plate

Thermal insulation material: high-density polyurethane foam and glass fiber

Freezing system water-cooled or liquid nitrogen, semi dense compressor, environmentally friendly refrigerant (R404a/R23)

High quality nickel chromium alloy heater

Blower centrifugal fan

Controller large screen LCD color touch screen, displayed in Chinese/English

Protective device without fuse switch, compressor overpressure, overheating, overcurrent protection, overtemperature protection, fan overload protection, fuse, dry burning machine protector, water shortage protection switch, fault warning system, alarm

Standard accessories include one three-layer vacuum observation window, one Φ 5cm test hole, two sets of test racks, one indoor lighting fixture, indicator lights, four mobile work wheels, one humidification water tank, a 2-meter power cord, and a communication interface

Purchase accessories RS-232C, recorder, special test hole, special test stand, and add shelf partitions

Operating environment temperature: 5 ℃~35 ℃

Power supply AC380 ± 10% 50HZ three-phase four wire+protective ground wire

Dongguan Jiuxing Electronic Technology Co., Ltd

contacts; Xiao Ling
Telephone;
Fax;
www.gaodiwenxiang.com