Electronic Sentry Face Recognition Temperature Measurement and Epidemic Prevention Screening Terminal

The COVID-19 has been effectively controlled. After the resumption of work and production, a large number of people have moved and public places have opened The management and control of the COVID-19 virtually increased the input of human resources,ZhongandaWe have launched a health code ID verification terminal. The health code ID verification terminal software is designed for individuals entering and exiting residential areas Automatic verification of health codes and temperature measurement for office buildings, schools, public places, etc., targeting ID cards Conduct verification of person, ID, and health codes, and select open person ID verification options for different usage locations A multifunctional health code identity verification terminal device software for facial recognition and health code verification.

1Comparison of people, evidence, temperature control, and epidemic prevention

Enter the device recognition area and place your ID card in the ID card reading areaThe device interface will display personal temperature and information

2People, code comparison, temperature control, epidemic prevention

Mobile phone application'Jian'Kangma”Afterwards, enter the device recognition area and place the health QR code in the device QR code recognition area. The device interface will display personal temperature and information

Product Introduction

Adopting Ruixin MicroCortex-A17framework1.6 GHz CPUHigh performance hardware platform clock frequency, set up Equipped with industrial grade cameras and facial liveness recognition technology, as well as Hyman32*32L5.0Temperature measurement module, yes A high-performance and highly reliable product. support1:1and1： NFacial comparison and retrieval, supporting Mask recognition, supporting human body temperature detection, high temperature warning, and supporting ID card reader and QR code scanning Expansion of various peripherals such as modules, suitable for office buildings, attendance, communities, scenic spots, office buildings, and public spaces Service venues, construction sites, government units, and other application scenarios that require the use of QR code temperature measurement.

product image

Application scenarios

Suitable for communities, office buildings, schools, hotels, scenic spots, transportation hubs, and other public places Shared service locations, etc.

On site environmental requirements

1. It is not recommended to install it directly outdoors in direct sunlight due to lighting and indoor environment. In case of special circumstancesIt is necessary to do a good job of shading and rain protection;

2. Network environment: We strongly recommend stable wired connections, as network quality directly affects recognition speed Alternatively, it is recommended to use international signals for door openingRVV2X0.5Above the standard, wireless is not recommended.

Product Features

♦adopt8inchIPSfull perspectiveLCDdisplay.

♦support1WFacial database. recognition rate99.67%oFacial recognition through speed0.3In seconds.

♦Support accurate facial recognition comparison while wearing a mask.

♦Adopting industrial grade wide dynamic camera, night infraredLEDDouble supplementary light.

♦Support Ruixin MicroRK3288A quad core processor with powerful performance.

♦Support human temperature detection, temperature display, and temperature measurement distance0.5-1.5Meter (optimal temperature measurement distance) leave0.5rice-0.6The temperature error is within meters0.3°cSupport automatic temperature alarm and second level detection for abnormal body temperature Measure speed and attendance temperature data. Suitable for indoor use.

♦Supports ID card readers, fingerprint scannersICVarious peripherals such as card readers, QR code readers, etc Expansion.

♦Support system levelAPPOffline levelAPP+Multiple backend network level optionsAPIDocking and document improvementSupport secondary development.

Precautions

1. Live operation is strictly prohibited during the installation and wiring process;

2. Before wiring, check if all circuits are normal, and only after inspection can the equipment wiring diagram be followed End connection;

3. If the host is connected with a dedicated connector and cable, the crimping should be firm and reliable;

4. For the stability of the system and the convenience of future maintenance, all wiring connectors cannot be placed inside pipes or Places that are easily submerged in water;

5. After all the equipment is installed, it is necessary to comprehensively check whether the wiring of each part is correct, such as Any wrong connection can potentially cause the entire system to malfunction;

6. When powering on, if any abnormal situation is found, the power should be immediately cut off until the fault is resolved;

7. If the system is not functioning properly, please check in sections after power failure. If the cause of the malfunction is not identified, please notify the agent Please do not repair or replace components on your own, which may cause system damage, to the sales or manufacturer's after-sales service department.

Technical Specifications

Product Model performance

How to connect the device to the external network

switch

Connect the network port in the tail line of the facial recognition device to a network cable and plug it into any port of the switch to ensure proper communication The computer connected to the replacement machine can access the external network without any debugging, and the facial recognition device automatically obtains itIP

Installation method of access control equipment

1. The nominal value of the power supply for this device is DC12V3AoPlease strictly follow the equipment wiring diagram for installation Wiring, it is strictly prohibited to carry out live connection or disconnection operations;

2. When installing this device in extremely cold and hot environments, it is necessary to communicate with the manufacturer's technician in advance It can be pre installed with a temperature control device.

Installation precautions

1. In actual wiring, if the host12VThe power supply line is not usedDedicatedpower extension cord”And the distance is long, which leads to excessive equivalent resistance of the cable, making it easy to have insufficient terminal voltage（W11V）、Lord Repeated restarts, crashes, and other abnormal phenomena of the machine;

2. This device has a built-in relay device, and its magnetic lock (or other access control unit) has the highest load capacity The high voltage cannot exceedDC12V、The maximum current cannot exceed3A,If it exceeds the limit, the relay will be broken down, Causing inability to open the door;

3. The device comes with a built-in power adapter as shown in the figure, with a total length of1Meter, including power cord (weak current part) 40cm,Power cord (high voltage part)40cm;

4. The extension of the power cord (weak current part) should not exceed3Otherwise, it will cause the device host to become electrified Insufficient voltage supply leads to abnormal phenomena such as repeated restarts and crashes. If the power supply is far away from the device, it can Extend the power cord (high-voltage part);

5. If using other adapters, such as9VThe1A,Insufficient voltage and low current can both cause problems with the device Backup and restart repeatedly;

6. The cable used should not be too thin (such as a thin Ethernet cable), and it is recommended to parallel multiple identical cables or Use copper core thickened cables to ensure voltage〉HV.

Attention: If using Ethernet cables, use extension cords4The positive pole of the Ethernet cable is used,4Stock as negative pole.

Other precautions:

1. Temperature measuring equipment should be installed without ventilation,0°C~35°CIndoor environmental use;

2. The significant temperature difference between indoor and outdoor environments can affect the accuracy of temperature measurement;

3. Need to start preheating10Minutes, start after the sensor temperature reaches thermal equilibrium with the ambient temperature Testing;

4. Need to ensure equipment3There are no heating sources, air conditioning vents, or other factors affecting within a meter range.