JSH3704BSemi automatic open flash point and ignition point tester for petroleum products (Cleveland Open Cup method)

1、 Compliant withGB/T3536TheASTM D92TheISO2592standard

2、 Main technical parameters:

Detection range: 80～400℃

Heating power:300W

Ignition gas: Liquefied petroleum gas and coal gas

Cooling method: forced air cooling

Working power supply:AC220V±10% 50HZ

3、 Performance and features:

1Adopting automatic control of heating rate.

2Using a manual ignition test with an ignition switch, the igniter is driven by a motor. The motor rotates in both directions to drive the ignition rod to rotate accordingly, ensuring that the test flame steadily sweeps over the top of the test cup.

3Use air cooling to cool the oil sample after the test is completed.

JSH3704B petroleum products semi-automatic open flash point and ignition point tester(Cleveland Open Cup method)

I. Comply with GB/T3536, ASTM D92, ISO2592 standards

Ii. Main Technical parameters:

Detection range: 80 ~ 400℃

Heating power: 300W

Ignition gas: LIQUEFIED petroleum gas and gas

Cooling method: forced air cooling

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics:

1. Automatic control of heating rate.

2. Manual ignition test is carried out by using the ignition switch. The igniter is driven by the motor, which rotates the ignition rod in the positive and negative direction to make the test flame sweep the top of the test cup steadily.

3. The oil samples after the test are cooled by air cooling.