Floating submersible aerator QFB2.2 floating aerator

QFB2.2Structural characteristics of float type submersible aerator:

　　1. It also has a stirring function during aeration.

　　2. The intake volume can be adjusted through the intake valve.

　　3. Underwater operation of the host, no ground equipment, low noise.

　　4. Underwater motors using imported submersible motor sealing technology.

　　5. The impeller is directly connected to the motor, with a simple structure, high efficiency, and long service life.

　　6. A mesh inlet can be added to prevent foreign objects from entering the body and causing unnecessary damage.

　　7. The design structure is compact, utilizing the self-priming function without the need for an external power supply and with even air bubbles.

　　8. Apart from the motor, other component materials are available for selection, including stainless steel, carbon steel, and cast iron.

　　9. It can be directly used in large areas of water such as oxidation ponds, rivers, and fish ponds without any infrastructure.

　　10. Floating positioning, easy to install, can be freely arranged and moved without interrupting process operation.

　　QFB2.2Floating submersible aeratorfeature

　　1. The body sinks into the water and runs without noise. A muffler can be installed on the water outlet of the intake pipe to enhance the noise reduction effect.

　　2. Unique mixing chamber design, high intake air volume, good mixing effect, and high oxygen utilization rate;

　　3. The air-water mixture is discharged from the mixing chamber at a special angle, which can cause the water flow to spiral in a horizontal direction and then flow upward, while also having a stirring effect during aeration;

Floating aeratorIt can be widely used for the treatment of wastewater and urban domestic sewage in industries such as petroleum, chemical, printing and dyeing, leather making, medicine, food, papermaking, textile, etc.

medium temperature~0℃-40℃

mediumPH value~5-9

The medium density does not exceed1150Kg/m3；

The equipment is limited by fiber materials, so it is necessary to avoid plastic weaving, metal wires, firewood sticks and other debris from entering the pool.

Submersible motors must operate completely submerged in water and cannot work in environments that are flammable, explosive, or highly corrosive