Instrument Introduction:

The ZJJ-6W flocculation mixer is widely used for water quality monitoring, with accurate speed, good reproducibility conditions, and excellent lighting, making it economically applicable. The ZJJ-6W flocculation mixer is designed for the flocculation test of ordinary water samples and wastewater samples. It can simultaneously process 6 samples and is specifically designed for repeated conditions between samples and between operations. A specialized instrument suitable for studying and comparing the coagulation effects of various coagulants in a wide range of circulating cooling water users, pharmaceutical production plants, research institutes, and laboratories. It is also suitable for wastewater treatment and stirring of various viscous liquids.

Product Features

This machine has six shafts that can be used simultaneously6A sample Driven by a speed regulating motor and displayed on a digital display for speed and time The stirring time and speed can be set arbitrarily, and the transfer time and speed can be set according to user needs. The time is set to0For long-term stirring. The instrument adopts a rotary dosing device.

Technical Parameter
Model:

ZJJ-6W
Mixing position: 6 positions

Sample quantity: 6

Mixing speed: 60-300 revolutions per minuteEach mixing shaft has a large mixing capacity1000ml

；

Timing range: 0-9999min

Variable speed range: 60-300 revolutions per minuteWeight approximately:
50kgPower Supply:

220V/50HzOperation details:GTCS-2013D

Type speed controllerGTCS-2013Dtype

The speed controller adopts a high-speed microcomputer chip to sample and control the motor speed, with stable speed, intuitive and clear display, and can be set for speed and timing through buttons. It also has data saving function. And it adopts dual digital display, which is very intuitive and clear. *The duration is 9999 minutes. Once the parameters are set, they can be saved for a long time. Suitable for speed control of various instruments. two

Panel appearance layout threeBelow is an oscillator controller to illustrate the functions of each key(9999*Long term timingdivide)

.Example: Settingoscillator

Stop working at 200 times per minute for 45 minutes.

1: Close the power switch, and the left display will show the original speed value. (Last running speed) The original timing value is displayed on the right

2: Press the SPEED ▼▲ key to set the speed to 200.

3: Press the TIME ▲▼ keys to set it to 45. (Setting 0 indicates a continuous operation state with an indefinite constant opening)

Press the start button to start, and the machine will slowly start until it reaches 200 revolutions per minute at the same time. It will then run steadily for 45 minutes before stopping and sounding an alarm for 10 seconds. Indicates that the scheduled run has been completed.

5: Press stop to stop running at any time (the timer also ends at this time).