Detailed introduction:

The G/Y4-68 boiler centrifugal fan and induced draft fan can be used for indoor ventilation and air exchange in general factories and large buildings. It can be used to input gas or output gas. The gas transported should be air at a temperature not exceeding 80 ℃ and other non self igniting, harmless to the human body, and non corrosive to steel. The gas must not contain viscous substances, and the amount of dust and hard particles should not exceed 150mg/m3

G/Y4-68 centrifugal fan boiler induced draft fan G, Y4-68 type boiler centrifugal through induced draft fan, mainly used for the ventilation and induced draft system of steam boilers with evaporation capacity below 230t/h in thermal power plants. When the performance is similar and there are no special requirements, G4-68 can also be used for mine ventilation and general ventilation. Both types of fans have the advantages of high efficiency, low noise, and high intensity.

The medium conveyed by the ventilation fan is air, and the maximum temperature shall not exceed 80 ℃. The maximum temperature of the flue gas transported by the induced draft fan shall not exceed 250 ℃.

Before the induced draft fan, a dust removal device with a dust removal efficiency of not less than 85% must be installed to reduce the dust content of the flue gas entering the fan and improve the service life of the fan.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content