Product Features	Using high-quality synchronous motors from the United States for reliable driving, the clutch system is suitable for a wide range of sensing structures
	Explosion proof type with good economy is widely used in solid material switch measurement in various industrial fields.

Working principle	A synchronous motor drives the metal shaft and blades through a gear reduction structure. When the rotating metal blade is subjected to
	When the upper obstruction of the detection material stops, the detection mechanism will drive the limit switch to act and output the amount of material on/off switch
	Signal and simultaneously turn off the synchronous motor in operation. When the detected material descends, the resistance of the metal blades disappears,
	The detection agency also drives the limit switch to operate, outputs a no material switch signal, and starts synchronous operation at several points,
	Such repetitive testing work

Technical Parameter ·Measurement range Used for measuring the upper and lower limit switch output of solid material level ·Applicable medium particles Material unit particle size ＜ 50mm ·Medium temperature Standard type: -20 ℃ -+100 ℃ High temperature type: -20 ℃ -+200 ℃ ·Environmental temperature -20℃—+80℃ ·Medium density ≥0.2g/cm² ·Signal output Passive or active contact switch signal output when reaching the limit ·Switch contact capacity 250VAC 5A PLC relay 48VDC 100Ma ·Switch delay About 2 seconds ·Drive motor 220VAC power is approximately 4VA ·Drive shaft load Standard axis ＜ 60N Reinforced axis ＜ 1500N High temperature axis ＜ 1500N Soft shaft ＜ 1500N ·Allow work pressure ＜1500N0.05MPa ·Material rotation axis The material of the part in contact with the medium is stainless steel 304 or other requirements are agreed upon ·Non contact with the medium Shell reinforced engineering plastic PBTB Partial materials Die cast aluminum+epoxy coated bearings NBR rubber ·Process Connection Standard External thread G1 1/2”Flange GB9119-2000 DN65PN0.6MPa ·Cable entry port Internal thread M20 × 1.5 (with cable sealing sleeve) ·Protection level IP65 ·Explosion proof standard Dust explosion-proof Zone10

Order Selection Table