VIP member
HR20FL
Advantages and features: CPC line rail HR20FL belongs to the high assembly series linear guide rail, with a combination height of 30mm and a slider mo
Product details
Advantages and Characteristics:The CPC line rail HR20FL belongs to the high assembly series linear guide rail, with a combination height of 30mm and a slider mounting hole of 40 * 53mm. The function of the linear guide rail is to support and guide the moving parts to perform reciprocating linear motion in a given direction.
| model | Assembly dimensions | Guide rail size (mm) | Slide size (mm) | ||||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | E | |
| HR20FL | 30 | 21.5 | 20 | 20 | 60 | 9.5×6×8.5 | 63 | 90.2 | 72 | 24.5 | 40 | 53 | 12 |
| model | Slide size (mm) | 额定负荷(KN) | Static torque (Nm) | weight | |||||||
| M×g2 | M1 | S | T | C | Co | Mro | Mpo | Myo | Sliding block (g) | 导轨(g/m) | |
| HR20FL | M6×9 | M5 | 5.5 | 9 | 20.8 | 43.3 | 430 | 420 | 420 | 496 | 2280 |
Taiwan CPC linear slide railHR20FLFriction is inevitable
In the vast majority of cases, fluid lubrication is limited to the boundary region, and direct friction generated by metal contact is unavoidable. In this friction, a large amount of energy is wasted through frictional losses.
In most cases, only grease lubrication is sufficient, which makes it particularly easy to rotate the lubrication system plan and maintenance of the machine toolCPC linear slide railHR20FLThere is a slight or negative gap between the slider and the guide rail, which can greatly improve the overall rigidity and movement accuracy of the guide rail. The G slider and guide rail are precisely integrated into a whole, with high rigidity and four directions of equal load, which enables them to have a large load-bearing capacity. The combination of lightweight maintenance and CPC's innovative design of E2 self-lubricating module products with a detachable perspective makes it easy to maintainCPC linear slide railHR20FLCan extend its maintenance cycle. The E2 self-lubricating module has the characteristics of cost saving, cleanliness and environmental protection. It is easy to install, disassemble and maintain, and the transparent oil tank can be used to check the oil level at any time, and corresponding lubricating oil can be selected. Can be utilized in extraordinary situations such as dust, harsh weather conditions, and water usage.
The CPC E2 self-lubricating module not only increases the convenience of user maintenance, but its modular plan also allows customers to directly purchase the E2 self-lubricating module kit and place it on the slider to achieve the function of lubricating parts. The high efficiency of the machine plan is achieved by the elastic deformation of the steel balls in the rotating linear guide rail, which can receive deviations in the placement surface and reduce the flatness requirements of the guide rail placement surface, thereby lowering the cost of mechanical processing. Linear guide rails have the characteristic of receiving after averaging the straightening deviations such as perpendicularity, flatness, and intersection that occur during the processing and assembly of the base of the guide rail. Therefore, adopting linear guides can greatly improve the effectiveness of machine planning.
The friction loss of the rolling surface is also correspondingly reduced, so it can makeCPC linear slide railHR20FLThe system has been in a high-precision state for a long time.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-