VIP member
HR25FN
Advantages and features: CPC linear guide HR25FN belongs to the high assembly series linear guide, with a combination height of 36mm and a slider moun
Product details
Advantages and Characteristics:The CPC linear guide HR25FN belongs to the high assembly series of linear guides, with a combined height of 36mm and a slider mounting hole of 45 * 57mm. It can withstand higher operating speeds; When the slider runs, its plastic end cap continuously bears the impact force generated by the steel ball circulating back, and the faster the running speed, the greater the impact force.
| model | Assembly dimensions | Guide rail size (mm) | Slide size (mm) | ||||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | E | |
| HR25FN | 36 | 23.5 | 23 | 23 | 60 | 11×7×9 | 70 | 80.2 | 60 | 29.6 | 45 | 57 | 12 |
| model | Slide size (mm) | 额定负荷(KN) | Static torque (Nm) | weight | |||||||
| M×g2 | M1 | S | T | C | Co | Mro | Mpo | Myo | Sliding block (g) | 导轨(g/m) | |
| HR25FN | M8×10 | M6 | 8 | 10 | 18.8 | 36.4 | 410 | 300 | 300 | 470 | 3020 |
Using Taiwan CPC linear guide railHR25FNPrecautions and maintenance
1. Keep the guide rail and its surrounding environment clean. Even if invisible dust enters the guide rail, it will increase the wear, vibration, and noise of the guide rail.
2CPC linear guide railHR25FNUse appropriate and accurate installation tools, try to use specialized tools, and avoid using fabrics and short fibers as much as possible.
3CPC linear guide railHR25FNWhen using and installing, it is necessary to be careful and careful. Strong stamping is not allowed, hammering the guide rail directly is not allowed, and pressure transmission through rolling elements is not allowed.
4. To prevent rusting of the guide rail, when directly taking the silver guide rail by hand, it is necessary to thoroughly wash off sweat on the hands and apply high-quality mineral oil before operation. Rust prevention is particularly important during the rainy and summer seasons.
Therefore, a considerable level of caution is required when using it, even if high-performance is usedCPC linear guide railHR25FNIf used improperly, it cannot achieve the expected performance effect and can easily damage the guide rail. However, under certain special operating conditions, the guide rail can achieve a longer lifespan than traditional calculations, especially under light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated and limited by a lubricating oil film to prevent surface damage caused by pollutants. In fact, under ideal conditions, the so-called permanent rail life is possible.
Lubrication and maintenance: There are sealing methods for grease lubrication, such as pre filling lubricating grease in the sealed guide rail, and filling an appropriate amount of lubricating grease inside the housing, which can be replenished or replaced at regular intervals. In addition, for machinery with multiple guide rails that require lubrication, a centralized grease supply method with pipelines connected to each lubrication point is also used. Lubricating with grease can achieve a long period of time without the need for replenishment after filling with grease once, and the structure of its sealing device is also relatively simple, so it is widely used. Oil lubrication is relatively simple. Regular lubrication can greatly improveCPC linear guide railHR25FNThe service life.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-