VIP member
HR25ML
Advantages and features: The CPC linear guide rail HR25ML belongs to the high assembly series of linear guides, with a combination height of 40mm and
Product details
Advantages and Characteristics:The CPC linear guide rail HR25ML belongs to the high assembly series linear guide rail, with a combination height of 40mm and a slider mounting hole of 50 * 35mm. The design of the binding unit between the slider and the guide rail allows the linear guide rail to bear a certain torque and also withstand loads in various directions such as up, down, left, and right.
| model | Assembly dimensions | Guide rail size (mm) | Slide size (mm) | ||||||||||
| H | W2 | W1 | H1 | P | D×d×g1 | W | L | L1 | h2 | P1 | P2 | E | |
| HR25ML | 40 | 12.5 | 23 | 23 | 60 | 11×7×9 | 48 | 100.2 | 80 | 33.6 | 50 | 35 | 12 |
| model | Slide size (mm) | 额定负荷(KN) | Static torque (Nm) | weight | |||||||
| M×g2 | M1 | S | T | C | Co | Mro | Mpo | Myo | Sliding block (g) | 导轨(g/m) | |
| HR25ML | M6×9 | - | 12 | 12 | 23.4 | 48.5 | 560 | 520 | 520 | 665 | 3020 |
The difference between Taiwan CPC linear guide rail and CPC linear guide rail
Linear guide rail and linear guide rail are just called different by everyone. In fact, the essence of these two is the same. Linear guide rail, also known as linear guide rail, usually refers to rolling guide rail and is used in various industries, mainly in the mechanical and automation industries. The main function is to make repeated linear movements in a given direction, which can be classified into several types according to their frictional properties.
A linear guide rail consists of two parts, a slider and a slide rail. The slider contains internally circulating balls or rollers. A slide rail is a modular component that can be pre customized. It is a standardized and serialized individual product that can be installed on machine tools. After wear and tear, it can be disassembled and replaced.
Hard rail refers to a steel embedded guide rail, which is usually installed on the bed after processing. Hard rails are generally used for rough machining, with good rigidity and slow speed. Steel embedded and plastic coated guide rails are generally used for heavy-duty situations. Its lubrication is very important. But after the guide rail wears out, adjusting it is also very troublesome. But high-end machines still use hard rails more often. Hard rails are mainly used for heavy cutting, while wire rails are mainly used for light cutting. The weight and lightness of cutting are also relative. Heavy cutting is matched with low-speed hard rails adapted to the machine tool, while light cutting is matched with high-speed rails adapted to the machine tool.
The track speed is fast and suitable for precision machining. Nowadays, wire tracks are more commonly used, but the width of the wire track is determined by the design of the machine tool. Precision machining generally uses linear rolling guides, which have fast movement speed, low rolling resistance, no crawling phenomenon, and convenient lubrication. After long-term use, the accuracy loss is relatively small.
The CPC linear guide rail HR25ML belongs to the high assembly series linear guide rail, with a combination height of 40mm and a slider mounting hole of 50 * 35mm. The design of the binding unit between the slider and the guide rail allows the linear guide rail to bear a certain torque and also withstand loads in various directions such as up, down, left, and right.
The CPC linear guide rail HR25ML belongs to the high assembly series linear guide rail, with a combination height of 40mm and a slider mounting hole of 50 * 35mm. The design of the binding unit between the slider and the guide rail allows the linear guide rail to bear a certain torque and also withstand loads in various directions such as up, down, left, and right.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-