1、 Overview

Cyclotron oscillator is a biochemical instrument for cultivating and preparing biological samples. It is an indispensable experimental equipment for scientific research, education, and production departments such as plants, organisms, microorganisms, biological products, genetics, viruses, medicine, and environmental protection.

2、 Characteristics

The instrument is floor standing, with a low center of gravity, and operates smoothly and reliably in continuous operation. Its main feature is that the universal spring bottle holder is particularly suitable for the cultivation and preparation of biological samples for various comparative experiments. Equipped with mechanical timing. Stepless speed regulation, easy to operate * *.
3、 Technical indicators:

Model: ZH-300-42

Name: Large shaking table

Capacity: 300ml * 42

Amplitude: 20mm

Oscillation mode: Cyclotron

Oscillation frequency: 40-300r/min

Power supply: AC 220V, 50Hz

Three phase AC motor variable frequency speed regulation

Non eccentric rotating mechanism

The transmission adopts high-quality stainless steel special fixtures for bearings in Harbin
4、 Instructions for use:

Using at medium speed within the speed range can extend the lifespan of the instrument.
2. The instrument should be placed on a sturdy workbench, with a clean and tidy environment, moderate temperature, and good ventilation.
Before using the instrument, place the speed control knob in the * small position.
4. Fill the culture test bottle. In order to ensure good balance performance of the instrument during operation and avoid significant vibration, all test bottle positions should be filled when bottling, and the culture medium in each bottle should be roughly equal. If there are insufficient culture bottles, the test bottles can be symmetrically placed or filled with other equal amounts of solution to fill the empty spaces.
5. Select the timer and set the "timer" position.
Connect the external power supply, place the power switch in the "on" position, and the indicator light will turn on. Slowly adjust the speed control knob to the desired speed. If you need to reverse, just hit the reverse position.
Before each shutdown, the speed control knob must be placed in the * small position, the timer must be set to "zero", the power switch must be turned off, and the power supply must be cut off.