wire take-up machinehydraulic systemMain technical parameters:

1. Maximum tension (kN): 4 × 45 or 2 × 90 2, Continuous tension (kN): 4 × 40 or 2 × 80

3. Maximum unwinding speed (km/h): 5 4. Bottom diameter of unwinding drum groove (mm): Φ 1500

5. Number of drum slots: 4 × 5 6, maximum pullback force (kN): 4 × 45 or 2 × 90

7. Maximum pulling speed (km/h): 4 × 18, applicable maximum wire diameter (mm): Φ 40

9. Engine power/speed (kW/rpm): 82/2500 10, external dimensions (mm): 4700 × 2350 × 2800

11. Weight (kg): 11500

Purpose: Used for tension release of various wires and ground wires, can be used with one pull two or one pull four.

Characteristics of the hydraulic system of the wire winding machine:

1. The lining of the unwinding drum is made of wear-resistant MC nylon; 2. The tension of the unwinding is continuously and infinitely adjustable, which can achieve constant tension unwinding;

3. Spring operated normally closed multi disc brake with pressure loss protection;

4. Equipped with four sets of hydraulic power output interfaces for connecting hydraulic wire shafts.

Description of Hydraulic System Configuration for Wire Harvester

1. Imported Cummins water-cooled engine; 2. The main pump and motor are products of Bosch Rexroth;

3. Italian RR gearbox; 4. The main hydraulic valves are Bosch Rexroth products;

5. Vika hydraulic instrument.

Technical requirements for the hydraulic system of the winding machine:

1. Before assembly, all components need to be sorted and cleaned thoroughly

2. Assemble when conditions permit, and tighten all fasteners without any looseness during assembly.

3. The length can be customized according to specific customer needs or based on on-site craftsmanship.

4. Unqualified products must be strictly controlled and not assembled.

5. After assembly, the overall appearance is beautiful and clean.

labelhydraulic systemProduct Series

Related links:hydraulic cylinder

本文地址： http://www.shziying.com/product/product286.html