
product overview
The waterproof and splash proof handheld testing device, commonly known as a showerhead, is made in accordance with the relevant provisions of GB4208's IPX3 and IPX4, IEC60529 and other standards, and is used to test the waterproof performance of appliances or appliances with waterproof function. For certain types of equipment enclosures that cannot be fully wetted by rain through a swinging tube, manual operation of a water-resistant and splash proof handheld testing device is used to supplement.
The main difference between the handheld waterproof test of IPX3 and IPX4 is that IPX4 requires the balance baffle of the sprinkler head to be removed, causing the shell to be splashed with water in all possible directions.

Main technical requirements
Serial Number |
project |
parameter |
1 |
Using water sources |
Clean and impurity free water with a water flow rate and pressure of 50-150kPa, equipped with a water purification and filtration device |
2 |
Parameters of water spray nozzle |
Outer diameter of Ø 102mM, spherical diameter of S Ø 75.5mm, 1 middle hole, 24 inner circles with an angle of 30 °, and 96 outer circles with an angle of 15 °, totaling 121 holes with a diameter of Ø 0.5mm, made of brass |
3 |
discharge |
10L/min ± 5%, flow meter adjustable |
4 |
Pressure gauge range |
0~0.4Mpa |
5 |
flapper |
removable |
6 |
pressure gauge |
0~0.25MPa |
7 |
Site requirements |
IP waterproof testing room, with a flat floor, lighting, good water inlet and drainage functions, and wall installation |
8 |
Component List |
1 showerhead nozzle 2. Pressure gauge 3. Flow meter (optional) 4. Water pipe (optional) 5. Flexible hose connector (optional)
|














Contact: Mr. Zhong
Telephone:
Mobile phone: (WeChat)
QQ :8933882
Email: sales@shice17.com
Website: www.shice17.net
