Instructions for Use：

When using this instrument, first check if all the accessories accompanying the machine are complete, and then separate the stirring rods separatelyInstall on six shafts, tighten, and turn off all work switches. And adjust the speed control knob to the ****** low position, place the solution bottle to be stirred on the machine base, turn on the power, close the power switch, and turn on the lifting switch,Adjust to the appropriate height and align the stirring rod with the center. Turn the timer knob to the normally open position（ON）Turn on the motor power at the desired location or timing,Gradually adjust your desired working speed from low speed to high speed. If lighting is required,Turn on the lighting switch again.

Precautions:

1. Using at medium speed within the speed range can extend the lifespan of the instrument.

2. Before using the instrument, place the speed control knob in the * * * small position.

3. Connect the power and slowly adjust the speed knob to the desired speed

4. Before each shutdown, the timer knob * * * "zero" position speed control knob must be placed in the * * * small position.

5. The lifting height is controlled by a switch.Up for promotion,Down to Down,Stop in the middle,Can stop at any position.

Technical Specifications:

1. Multi head mixing: can be carried out simultaneously or separately, with automatic lifting, lighting, and timing function.

2. Motor power:6*60W，

3. Mixing volume:6*1000ml，

4. Speed:0-2800turn/Divided, with digital display.