Performance Introduction

Global leader in powder and porous material analysis and testing instruments, Kantar Instruments from the United States has officially releasedDynaSpob BT series adsorption breakthrough curve analyzer. This groundbreaking instrument, with itsIts unique safety design makes it easy to study any complex adsorption process. In widthWithin a wide range of temperature and pressure, gas flow rate can be adjusted and gas composition can be well defined.In this way, the status of adsorbent technology under real process conditions can be investigated or studied.

application

• ·Determination of penetration curve
• ·Study on the kinetic performance of adsorbents
• ·Investigation of Co adsorption and Displacement Phenomena
• ·Selective adsorption determination
• ·Reasonable proportion reduction of technology separation process
• ·Dynamic adsorption and desorption experiments
• ·Determination of single and multi-component adsorption data
• ·Investigation of temperature distribution curve along the adsorption bed layer

A complete understanding of the complex processes occurring in fixed bed reactors is key to achieving optimal separation performance, and the prediction of breakthrough curves is the basis for the design and operation of fixed bed adsorption processes. The dynaSpob BT series dynamic adsorption penetration analyzer features a robust adsorber design, protective doors, workspace lighting, and a clear PC control interface to ensure safe and convenient instrument operation. The pressure of the adsorber is permanently measured, and even if the instrument is turned off, the pressure will be displayed on the front panel of the instrument. When the temperature of the heating package exceeds the user set value, the signal light will turn on. The safety protection sensor for detecting combustible gases is standard on all dynaSpob BT instruments. In the event of a gas leak, the instrument will jump back to idle mode and automatically shut down. In addition to excellent safety design, the dynaSpob BT series also has many unparalleled advantages:

• ·Automatic processing of sequential adsorption and desorption experiments
• ·In situ sample preparation
• ·Reverse airflow capability
• ·Automatic adsorber pressure regulation, capable of up to 10 bar
• ·Up to 4 high-precision quality flow controllers can be configured
• ·Automatic built-in gas mixing
• ·Determination of gas composition at inlet and outlet
• ·Pre temperature control of inlet gas and temperature control of adsorber
• ·Inlet gas temperature monitoring
• ·Measurement of temperature distribution curve inside the adsorption bed (with four temperature sensors)
• ·Monitoring of pressure drop along the axial direction of the adsorber
• ·Built in thermal conductivity detector (TCD)
• ·Optional gas analysis through interface connection to mass spectrometer
• ·Combustible gas security sensor can automatically shut down
• ·Adopting intelligent lighting in the workspace to improve safety

technical indicators

Number of adsorbers	1
Quantity of quality flow meters	2 (standard); 3 or 4 (optional)
Maximum pressure (bar)	10
sample preparation	in situ
Temperature range of heating package	Room temperature~400 ° C
Cycle thermostat (optional) temperature range	-20 °C ~ 90 °C
Height x Width x Depth	80 cm (31.5 in) x 95 cm (37.5 in) x 60 cm (23.5 in)
weight	About 200kg (440 lbs)