1. Bed frame

Made by advanced resin sand casting and box structure design, the lathe is treated with aging to eliminate internal stress, and the material is tough. Combined with box structure design and high rigidity body structure, the lathe has sufficient rigidity and strength to demonstrate cutting resistance and high precision.

2. Transmission shaft
The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

3. Screw rod
　　 The X/Y axis adopts high-precision double nut preloaded precision ball screws, combined with the locking and pulling design of the support seats at both ends, which can eliminate the transmission backlash and pre compensate for the errors caused by temperature rise, ensuring positioning accuracy.

4. Spindle motor
　　 By using a high-speed motor, the CNC lathe has excellent performance in high-speed, low-speed, light and heavy cutting (power up to 7.5/11KW).

5. Electrical box
The electrical box is equipped with a heat exchanger to ensure system stability, and the external wiring part has protective coils that can withstand heat and oil and water.

6. Lubrication system
The automatic depressurization lubrication system provides centralized oil supply, with an advanced depressurization intermittent oil supply system that provides timely and appropriate oil supply to each lubrication point in a timed, quantitative, constant pressure, and individual manner, ensuring that each lubrication position receives lubricating oil at the right time, allowing the CNC lathe to operate for a long time without any worries.

7. Fully dense sheet metal
Under the current strong requirements for environmental protection and operator safety, Jiasu Precision Machinery has implemented the Jiasu L-28Phorizontal latheSheet metal design focuses on aesthetic appearance, environmental friendliness, and ergonomic compliance. The fully sealed sheet metal design completely prevents cutting fluid and cutting fluid splashing outside the CNC lathe, keeping the surroundings of the CNC lathe clean.

Product Model:	Jiasu L-28P
processing capacity
Maximum turning diameter on the bed:	320
Maximum turning diameter on the saddle:	90
Maximum turning diameter:	280
Maximum turning length:	200
Bed tilt angle:	45°
Spindle
Specification of spindle nose end:	A2-4
Specification of spindle chuck:	5'
Spindle through-hole/rod diameter:	46/29
Maximum spindle speed:	4500
Feed axis
X/Z-axis travel:	320/250mm
X/Z-axis fast movement speed:	30/30m/min
X/Z-axis screw specifications:	2510/2510
Minimum resolution:
electric machinery
Spindle motor power:	3.7/5.5kw
X/Z-axis motor power:	1.2/1.2kw
Cooling motor power:	0.49kw
Hydraulic station motor power:
Tool changing system
Type of tool change:	Row knife
Knife tower model:	Y100 (optional)
Cutting surface:	430X153
Standard tool holder size:	20X20mm
Standard boring bar diameter:	φ25mm
General specifications
Power capacity:	10KVA
Dimensions (length X width X height):	1650*1100*1350
Net weight (approximately):	2T

Standard configuration:

1. Japanese FANUC/Mitsubishi/Guangshu GSK controllers
2. Electrical box heat exchanger
3. Standard RS-232 interface
4. RS-232 transmission cable
5. Hydraulic three jaw chuck
6. Fully sealed splash proof device
7. Automatic centralized lubrication system
8. Work lighting
9. Work status indicator light
10. Three phase isolation transformer
11. Toolbox
12. Basic adjustment screws and washers
13. Operating instructions

Select configuration:

1. Taiwan's new generation controller
2. Elastic sleeve clamp
3. Main spindle C-axis control system
4. Spindle positioning brake device
5. Power head and power turret device
6. Automatic workpiece collector

The product adopts a sales strategy of agency, and we are now recruiting domestic and foreign agents interested in joining the CNC machine tool industry. The company will fully respect and protect the rights and interests of CNC machine tool agents, and provide comprehensive technical guidance and after-sales service support

1. Product price: Pricing based on specific customer configurations
2. Logistics costs: negotiable
3. If you need more specific information, please contact us. Jiasu Precision Machinery will be happy to serve you