M31 is a manual measurement station developed for use in workshop environmentsMeasuring car connecting rods.

The measuring station conducts complex measurements by obtaining data from two measurement sections of the piston pin hole and crankshaft hole respectively; Each measurement section is equipped with four contacts placed 90 degrees apart.

The content that can be detected by the measuring station is as follows:

• Piston pin hole and crankshaft hole inner diameter
• thickness
• ovality
• conicity
• center distance
• Verticality across the hole
• Distortion degree
• Curvature
• Connecting rod big end holetwoParallelism between faces

Measurement stations can work in harsh environments and can be customized to inspect single part types, or configured with interchangeable structures to detect different part types.

The workpiece can be moved to the measurement position through a mechanical lifting structure driven by manual or pneumatic systems.

connecting rodThe standard measuring platform is equipped with an ambient temperature probe.

Optional, one workpiece temperature probe and one laser marking machine.

• regardingconnecting rodIn terms of complete quality inspection, it is an accurate solution
• strongEnsure precise inspection during continuous measurement operations
• Targeting different types of partsInterchangeable typeThe measuring station
• reliableCan ensure excellent performance in the long term

Automotive connecting rod interchangeable typeThe standard application scope of the measuring station:

• Piston pin hole diameter: 17 to 60 mm
• Crankshaft hole diameter: 40 to 110 mm
• Center distance: less than or equal to 300mm
• connecting rodThickness: 15 to 50 mm

We can also provide a quotation for the inspection of workpieces that are not within the above scope upon request.

Measurement table size:

For typical casesconnecting rod(Center distance: 140/145mm)