QSB0.75 type underwater aerator pump, underwater jet aerator pump, submersible jet aerator pump

Nanjing Du'anUnderwater aerator pump QSB0.75 typeThe adhesive bubbles floating in water are usually caused by the buoyancy force of gravity and other external forces. Newton's two laws can be derived from the velocity of gas particles, and the floating velocity depends on the density difference between water and gas particles, the diameter (or characteristic diameter) of gas particles, and the temperature and flow rate pattern of water. If the bubbles are larger within the band, the lower the density of gas particles, the larger their characteristic diameter.

Practice has proven that the particle size of air flocs causes constant changes in resistance, as well as changes in the formation of bubbles and floating rates in the air force. The detailed floating speed can be determined based on experiments. Based on the determination of the rising speed, it can be concluded that the appearance of the air bearing load. The floating exchange rate depends on the demand for water.

In the main target pollutant aeration flotation treatment method for oil-water separation, there are usually two types of flocculent particles: coagulation reaction monomers. There are three methods for floc particles, mixed monomer and flotation foam, namely bubble jacking, and foam packaging carries gas-solid adsorption. Obviously, the packages between them are bonded with strength, air, and foodThe strength of the contact between the waste cotton body and the particles and flocs, as well as the interface properties between the water, gas, and particle phases, are more important. The water content of the surfactant, the hardness of the water, the concentration of suspended solids, and the close contact between the foam and the adhesive are also important. The quality of air handling and related background are also important. In practical applications, water quality is adjusted by water quality.

Underwater jet aeration pumpmaterial

The base and casing of the aeration dedicated pump are made of HT250 cast iron, which has certain corrosion resistance and can withstand the impact of certain loads.

The motor shaft of the dedicated aeration pump is made of 2cr13 corrosion-resistant material, and measures have been taken to eliminate stress concentration in the structural design.

The mechanical seals of the dedicated aeration pumps can be made of silicon carbide/silicon carbide, tungsten carbide/tungsten carbide, or silicon carbide/tungsten carbide materials according to the pumping medium. The design service life of the mechanical seals is over 12000 hours.

The bearings of the dedicated aeration pump are imported NSK bearings, and their cumulative design operating life can ensure over 40000 hours.

The static seal of the 5 submersible jet aerator adopts Dingqing-70 O-ring.

All fasteners of the 6 submersible jet aerator are made of stainless steel.

The material of the intake pipe of the 7 submersible jet aerator is galvanized.

The nozzle material is cast iron.

The submersible aerator using three-phase power supply should be checked for rotation direction after initial start-up or each reinstallation. Incorrect rotation direction can reduce efficiency and damage the water pump.

The inspection method is: Before the final installation of the submersible aerator, look up at the suction port of the submersible aerator from the bottom and rotate the impeller counterclockwise. If several submersible aerators are connected to a controller, each aerator must be inspected separately. If the rotation direction is incorrect, the position of any two of the three-phase wires on the controller can be exchanged to change the rotation direction

Jet type underwater aerator

Nanjing Du'an Water Treatment Equipment Co., LtdUnderwater aerator pump QSB0.75 typeafter-sales service

Nanjing Du'an Water TreatmentAfter sales is crucial for the development of a company's business and the establishment of its reputation, and it is also an important step in the progress of a company's development. For users, it is a guarantee of product quality and also a reassuring guarantee;

1Adhering to the principle of customer first, all products produced by our company meet strict enterprise standards and national machinery department standards

2Provide spare parts, installation, commissioning, and maintenance services in a timely manner according to customer needs or agreements, and provide technical training to customer personnel.

3For large-scale engineering projects, production, testing, and inspection will be organized according to the requirements of the bidding documents, and cooperation will be provided with on-site acceptance by customers.

4Strictly followIS09001Standard organization for the procurement of raw materials and components, as well as the production and inspection of products.

5When the product cannot be used normally due to manufacturing quality issues under normal storage, maintenance, and usage conditions of the customer, we provide three guarantees (warranty, return, and replacement) service.

6Provide necessary technical documents and product qualification certificates for factory products.

7.During the warranty period, if the equipment fails to meet the specified technical parameters due to errors in the equipment or technical information provided by me, the user should immediately notify us when performing reasonable operations based on relevant technical information. After receiving written or telephone notification,24Exchange within hours/Repair defective equipment or technical documentation.

8.If the product is damaged or malfunctions due to improper use by the user or outside the warranty period, our company provides lifelong repair services for the product.