1Origin: Switzerland

II OR-T260Technical Parameter：

Machine weight: 3.6kg

Packing tape: PP tape/PET packing tape

Bandwidth: 9-10, 12-13, 15-16mm

Belt thickness: 0.5-0.8mm

Welding efficiency: 75-85%

Tightening force range: 0-1200N

Tightening speed: 290mm/second

Specification: Length * Width * Height 370 * 141 * 135mm

Battery type: Bosch 18V 2.0Ah lithium battery

Number of charging operations per charge: theoretically, 800 straps can be loaded

Charger: Bosch AL 1860 CV

Charging time: 15-30 minutes

Operation mode: fully automatic: one action to complete tightening, welding, and cutting; semi-automatic; hand movement

IIINew advantages

1. Adopting the new generation of Swiss made MAXON carbon brush free motor: carbon brush free represents no consumables, significantly reducing maintenance costs;

2. Tool Battery Protection Component (TCP): protects the battery pack from overheating and ensures stable current output;

3. The battery adopts German B lithium battery, with a self discharge rate of about 0.1%; No memory effect, no need to discharge before charging, can be charged at any time; The storage rate is 50% higher than that of nickel batteries, and the number of packaging times for one charge increases by 50%; Environmentally friendly without cadmium;

Introduction to electric strapping machine:

Electric strapping machine refers to a strapping machine that uses electric tightening, friction fastening, and automatic cutting of strapping belts. This machine has a high-end and beautiful appearance, is easy to operate, and is convenient to carry. It is suitable for packaging large products such as pallets, wooden boxes, steel, plates, and other large items. It is fast and efficient, and the quality of imported products is absolutely guaranteed. The packaging tape is widely applicable to PP/PET tapes, and has the highest cost-effectiveness among similar packaging machines worldwide. Our after-sales service system is first-class in the country

4 OR-T260Composition of electric baler：

1. Body; 2. Battery+charger; 3. Chinese instruction manual; 4. A set of simple maintenance tools; 5. It's like a packaging box.

5Working principle of electric baler：

Wrap the plastic steel strip or plastic strapping around the object from top to bottom, then place the strapping joint into the machine's working slot. The motor drives the tightening wheel to tighten the strapping, and the strapping is bonded by friction. Finally, the strapping is automatically cut.

VIFeatures of electric baler：

A packaging tool that can display the tightening force in real-time

◆ Packaging tool with bookmark function:

◆ Packaging tool with adjustable tightening speed;

◆ Packaging tools with alignment indicators for packaging straps;

A packaging machine with three color signal display and prompt sound;

A packaging tool with full touchscreen display function.

7Precautions for using electric baler batteries：
A. Do not dispose of batteries in trash cans, water, or fire at will to protect the environment and avoid danger.
B. To avoid battery short circuit, it should not be stored together with metal objects. Do not conduct the positive and negative poles of the battery in any way. Do not open the battery casing. Always keep it dry.
C. If the machine is not used for a long time, please remove the battery to extend its lifespan.
D. When the machine is not in use, please remove the battery to avoid rapid power loss. After being fully charged, the battery will completely lose power after about 1-2 months. To extend the battery life, please install the removed battery into the machine, use up the remaining power, and confirm that the battery power has been used up (red light flashing) before charging.
E. Incorrect usage methods such as using the battery before it is fully charged or charging it before the power is fully utilized can shorten the battery life.
F. Batteries and chargers must be kept clean and dry, and in accordance with safety precautions to avoid danger.

8Electric strapping machine battery charging：
A. Do not insert the new battery into the machine before charging.
B. When charging a new battery for the first time, please make sure to charge it for at least 16 hours.
D. The new battery must undergo five cycles of repeated charging/discharging before it can reach its normal maximum power.
E. To achieve optimal charging efficiency and complete saturation of the battery, please make sure to use up the battery power and place it for cooling

Afterwards, proceed with charging.
F. The different voltage changes in different regions can affect the length of charging time. Excessive temperature of the battery or charger can reduce charging

The electrical efficiency does not result in the battery being unable to fully charge. When the voltage is unstable, a voltage stabilization device needs to be installed to avoid charging

The device and battery are damaged.

9after-sale service：

1. One year warranty for the entire machine (damaged parts are not covered)

2. Provide 24-72 hour on-site maintenance services based on traffic conditions

3. Conduct regular follow-up visits twice a year to provide comprehensive inspection and maintenance of main components such as gearboxes that require refueling and maintenance

4. Provide a 24-hour service hotline to answer customer calls 24/7 and resolve technical inquiries