Product features of SFC air condenser dedicated reducer:
1. Designed according to the requirements of the air cooler fan drive, with simple selection:
The SFC air cooler special series reducer is a specialized reducer designed specifically for driving air cooler fans. According to the motor power and fan diameter, it is convenient to select the reducer suitable for customer needs from the SFC dedicated sample (G2202C).
2. Anti vibration design:
Increased output shaft bearing span. Even if a fan with excellent balance is designed, vibration will still occur during operation. By increasing the span design of the output shaft bearings, the SFC series gearbox can better withstand the vibration generated by fan operation. Uniform load-bearing design. The fixed bolts are evenly distributed relative to the center position of the output shaft, making the load-bearing capacity of the installation surface more uniform.

3. Flat installation surface design:
The SFC series reducers were designed with consideration for ease of installation and compact structure, adopting a special design structure. Even with optional components such as check valves and shaft end pumps, their flat installation surface structure can still be guaranteed.

4. Good heat dissipation design:
Considering the special installation position of the gearbox inside the cooling tower, it is difficult for the wind generated by the operation of the cooling tower fan to reach the installation position of the gearbox.
The SFC series reducer has an increased housing area, reduced oil level to minimize heat loss caused by liquid agitation, and a large oil capacity design, which greatly reduces the heat generation of the reducer. And it itself has good heat dissipation performance.

5. Low noise:
Compared to previous products in the same series, the noise has been reduced by 3-5 dB.
By using paired gear machining technology, the tight meshing of each tooth between gears has been achieved, effectively reducing the noise during gear meshing.
By using finite element method (FEM) analysis, the deformation of the casing under load is minimized The gear teeth are fully and completely meshed, while reducing the natural vibration frequency of the machine.

6. Convenient maintenance:
It can operate continuously for 9000 hours without maintenance. (The general maintenance cycle for a regular gearbox is 5000 hours)
The oil injection hole, oil discharge hole, and oil gauge are located on the outer extension of the housing on the output shaft side, ensuring that maintenance operations are not affected by the maintenance work position.
Due to the observation window being located above the oil level, it is not necessary to drain the oil, and the internal operation of the gearbox can be checked through the observation window.
The direction of rotation of the motor can be checked without disassembling it. (This feature requires a special type of coupling. If you have this requirement, please inform our sales personnel when placing an order.)

7. Can be used in conjunction with variable frequency motors:
The lubrication design of the SFC series is suitable for variable frequency motors in different speed environments.