SX-25 Xuan laser caliper

Pipe laser caliper, two-way laser caliper for pipe fittings, glass laser caliper equipment, available in stock from Sixuan

Product Application

Various transparent and semi transparent objects such as glass tubes and glass rods
LAN cable
coaxial cable
Fiber optic cables and flat cables
Frequency camera cable, communication cable
Power cables, pipes, and wires

Product description

Non contact optical measurement
Multi angle display on the operation panel
Laser or LED long-life light source
Adopting advanced DSP processing technology
Excellent dust and pollution prevention design
Protection level IP65,NEMA4
S232/485communication interface
Fully automatic closed-loop control technology, automatic feedback control of wire diameter
Measurement is not affected by speed and vibration, and automatic alarm is triggered when the wire diameter exceeds the tolerance
Scanning speed of 600 times per second (up to 1400 times per second)

Main technical parameters

Remote Display Product Description

Installation opening size: 91.5 * 43, features: not only has remote display function, but also has numbers; Interface: RS485/232; Diameter output: 0-10V; PID control output plusmn; 0.12.1V; Out of tolerance alarm output voltage (12V), with a long distance of up to 300 meters.

Installation location

The outer diameter measuring and controlling instrument can be installed before or after the cooling water tank. When installed in front of the sink, due to the proximity of the measuring head to the extruder and timely feedback control, the control effect can be obtained. However, the plastic has not yet solidified, and the set nominal value should be appropriately corrected. When installed behind the sink, the actual value of the cable outer diameter measured is relatively accurate and reliable, but the control lag is large and the control effect is slightly poor. Additionally, it should be noted that the tested cable should be dried, otherwise the water film on the outside of the cable will affect the measurement accuracy. In actual use, the nominal value should be appropriately increased according to the degree of water carried by the tested object.