Dual channel plastic tray cleaning and drying line, dual channel plastic baking tray cleaning and drying line, dual channel plastic freezing tray cleaning and drying line, dual channel baking mold cleaning and drying line, dual channel plastic egg tray cleaning and drying line, plastic square tray cleaning and drying line, dual channel plastic tray cleaning and drying machine, dual channel plastic tray cleaning and drying equipment, plastic tray cleaning machine price, plastic tray cleaning machine manufacturer

Introduction:

The plastic tray cleaning and drying line mainly consists of a plastic tray cleaning machine and a plastic tray drying machine. A novel equipment that uses high-pressure spraying as the main cleaning method, sequentially performing pre washing, high-pressure cleaning, rinsing, air knife water removal, hot air drying, etc., can continuously complete the processes of plastic tray cleaning, sterilization, drying, etc. Through practical use by users, this equipment has been proven to have a significant cleaning effect on plastic trays, greatly improving cleaning efficiency and reducing cleaning costs, and has received unanimous praise from users.

Scope of application:

Suitable for cleaning and disinfecting various containers such as turnover baskets, boxes, plates, buckets, molds, etc. It can save up to 80% of water, saving 7-8 people in labor compared to traditional manual cleaning methods. It is an ideal cleaning equipment for industries such as aquaculture, meat, seafood, fruits and vegetables, beverages, baking, fast food, horticulture, medicine, leasing, logistics, and electronic components.

Cleaning process:

The plastic tray that needs to be cleaned is fed into the plastic tray cleaning machine through a stainless steel chain, and sequentially passes through the pre washing stage, high-pressure cleaning stage, rinsing stage, and clean water cleaning stage to clean the plastic tray. Then it enters the plastic tray drying machine and undergoes air knife dehydration and hot air drying in sequence to remove water droplets on the surface of the plastic tray, achieving a clean and waterless effect.

working principle:

The pre washing stage of the plastic tray cleaning machine is that the water pump sucks out water from the pre washing water tank, sprays it out through the nozzle, and cleans all sides of the plastic tray to remove debris. The cleaned sewage is filtered and separated, and flows back to the water tank to remove debris. The main cleaning stage is when the water pump sucks out warm water from the main cleaning water tank, sprays it out through the nozzle, and cleans all sides of the plastic tray to remove remaining impurities and oil stains. The cleaned sewage is filtered and separated before flowing back to the water tank to remove impurities. The rinsing stage is when the rinsing water pump sucks out hot water from the rinsing water tank, sprays it out through the nozzle, and rinses away stains, cleaning agents, etc. on the plastic tray. At the same time, the cleaning material is disinfected and sterilized, and the water flows to the main cleaning water tank. During the clean water cleaning stage, a clean water spray is used for the final sterile cleaning to achieve hygiene and cleanliness. The drying section of the plastic tray dryer uses the normal temperature wind generated by the centrifugal fan to remove most of the water droplets on the surface of the plastic tray, and then enters the drying section. The hot air generated by the high-pressure centrifugal fan through the heat exchanger is used to evaporate the remaining water droplets and water vapor on the surface of the plastic tray, and the surface is free of scale pollution. The conveying system is driven by a variable frequency speed regulating motor, which adjusts the motor speed to control the cleaning time.