Main technical parameters:

1Electricity source: 220V 50HZ

2Heating power: 700W*4

3Mixing power: 40W*4

4Speed regulation range: 0~1600turn/divide(stepless)

5Temperature control: Using an electric contact thermometer(Mercury conductivity meter)from

useHouseholds can customize according to their needs.

6External dimensions:530*530*31

7Working size:220*220*130

Usage:

When using this instrument, the random accessories should be checked first to ensure they are complete, and then the fixtures should be installed in order to add the solution that needs to be stirred

Put it into a container and add a stirrer. Place the container on a stirring and heating plate. Connect the two signal wires of the self equipped electric contact thermometer to

Insert the thermometer into the solution and fix it on the fixture on the terminal post at the back of the machine. Adjust the top spiral and select the temperature that needs to be controlled

Degree. At this point, you can turn on the power and close the power switch. The power indicator light is on, and the mixing process has started. Speed regulation from low to high, not

Allow direct startup from high speed to avoid unsynchronized mixing and jumping of the mixer.

set temperature:

PressSETThe key can be used to set or view temperature settingsPoint. pressSETThe characters on the key digital tube start flashing, indicating that the instrument panel has entered the set state,

Press the △ key to increase the set value, press the ▽ key to decrease the set value, and long press the △ or ▽ key to quickly change the data. Press againSETKey instrument panel returns to positive

oftenThe working state temperature has been set.(If the temperature controller is intelligent, an additional temperature control manual should be provided).