VIP member
Product details
Six portsSPF Test UV Sunlight Simulator
Solar LightTMThe daylight simulator is used in 95% of SPF testing laboratories worldwide and complies with the latest COLIPA, JCIA, And FDA spectral radiation standards.
- All products undergo calibration traceable to NIST standards before leaving the factory
- One year warranty period
- Lifetime free telephone technical service
- Can extend the warranty period
- Compliant with the latest COLIPA, FDA, and JCIA standards
601 UV radiation output range 290-400nm (suitable for SPF testing and skin disease research). The light intensity output of each port of 601 can reach 4MED per minute, making it an ideal laboratory equipment for completing a large number of measurements. The output light intensity is 20 times that of the sun, accurately simulating the ultraviolet spectrum of the sun.
Each output port of 601 has a light intensity regulator that can control the output light intensity.
The main features are as follows:
- 300 watt bulb
- UV Filter - Compliant with the 2003 International SPF Testing Method Standard
- Internal to Igniter - Used for Xenon Arc Lamp Ignition
- light source
- 6 liquid optical fibers, each 19.7 "(50cm) long
- Adjustable bracket, vertically adjustable distance of 20 "(50cm)
- Complete high-performance optical components (for collimation and uniformity control)
- Output selection switch, can choose between UV-A and UV-A+UV-B spectral outputs
Technical indicators:
Lamp body | ||
Light bulb type |
300W short arc xenon lamp |
|
output |
6 8mm * 8mm output ports, 6 ports with independent adjustable strength, 0-100% |
|
Spectral output standard |
CO;IPA UV |
|
irradiance |
4MED/min (300W bulb) |
|
Uniformity of effective irradiation area |
<±5% (from collimating lens to effective working distance) |
|
|
Stability of output light intensity (Preheating)15 minutes later) |
Better than<±2% (maximum linear voltage fluctuation)<±10%） |
|
lens |
Coated anti reflective quartz |
|
Working distance |
<3mm from the output port surface to the test surface |
|
refrigeration |
Forced air cooling |
|
weight |
18lb. （8.1kg） |
|
size |
5.5″（140mm）Case Dia*17″（432mm）H*6.79″（172mm）fan assembly Dia. |
|
Power Supply | ||
type |
Adjustable, constant power supply |
|
refrigeration |
Forced air cooling |
|
Power requirements |
90-250VAC 4Amps |
|
weight |
8lb. （3.6kg） |
|
size |
12.75″（324mm）D*10″（254mm）W*4.5″（114mm）H |
|
Shutter Control | ||
manual control |
Manually open the shutter |
|
External trigger control |
The PMA dose control system controls based on time or dose settings |
|
Optional accessories (Dosage control system for SPF measurement using DCS-SPF)
Users can purchase an automatic dose control system separately to monitor spectral output and automatically control dose. It can accumulate the total ultraviolet output, and when the ultraviolet dose reaches the preset measurement value, it can automatically close the shutter to stop spectral output.
Port dose control system:
- PMA2100 Dose Control Table
- PMA2113 UVA detector
- PMA2103 UVB detector
- Dose Controller Shutter Power Control Board
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-