Adopting a planetary gearbox for deceleration, the rotation is more stable, with a full rotation angle of 360 degrees and no dead center.
The front legs of the crane adopt an extended span to increase stability, with a full span of 5.74m.
The standard configuration is a fixed rear leg, which is suitable for normal working conditions. Hydraulic rear support legs can be optionally selected to increase vehicle stability and are suitable for more complex and harsh working conditions.
Adopting a hexagonal cross-section form, the lateral stability and arm stiffness are greatly improved compared to traditional quadrilaterals.
Standard height limit switch and over winding alarm device, reliable protective working device.
Optional high-power LED work lighting, suitable for low light or night work lighting.
Optional torque limiter to provide customers with a safer and more reliable working environment.
Optional high seat for more comfortable and convenient operation, providing operators with a broader field of view.

Maximum lifting torque (kN&bullm): 250
Maximum lifting load (kg): 10000
Maximum working range (mm): 13300
Arm fully retracted length (mm): 4360
Maximum lifting height (from the ground) (mm): approximately 15300
Maximum elevation angle of boom (°): 75
Minimum elevation angle of boom (°): 0
Lateral span of front leg (mm): 2294-5740
Lateral span of rear leg (mm): 2200
Rotation angle (°): 360 full rotation
Crane weight (kg): 4100
Oil pump form: gear pump
Fuel tank capacity (L): 170
Hydraulic system working pressure (MPa): 23
Hydraulic system flow rate (L/min): 80