Seat belt impact testing machine (dynamic load)
1、 A Brief Introduction to Seat Belt Impact Testing Machine
Testing the overall dynamic load performance of fall suspension safety belts. Including: GB/T 6096-2009 Test Methods for Safety Belts, Section 4.8: Overall Dynamic Load Test for Fall Hanging Safety Belts, and Section 4.10: Dynamic Load Test for Components (including Straps, Connectors, Self Locking Devices, and Speed Differential Controllers). However, auxiliary components such as guide rails, guide ropes, and guide rods are used during testing, and the customer needs to provide materials, specifications, and dimensions. They can be designed and manufactured according to the customer's needs and provided information.

The safety belt tested by this device is suitable for use in high-altitude operations, climbing, and suspension operations, and the sum of the user's weight and load should not exceed 100kg. It is not used for testing safety belts for sports, firefighting, and other purposes. The equipment has reliable performance, can be continuously tested, and is easy to maintain and repair. Complies with the standards GB6095-2009 "Safety Belts" and GB6096-2009 "Safety Belt Testing Methods"

2、 Characteristics of dynamic load detection instrument for seat belts
1. The instrument adopts an electrical control system, which is intelligent and convenient to operate.
2. Various real-time tests have data display and situation records.
3. Provide a set of protective devices to effectively prevent injuries caused by the fall of the dummy.
4. Provide annual maintenance methods to extend the lifespan of the instrument.
5. Provide electric lift control system
6. Provide an automatic release control system
7. Unique design test stand, easy to assemble, capable of on-site equipment assembly.
8. Provide foundation drawings and technical support to facilitate customers in building foundations.

3、 Main technical indicators
1. Dynamic force sensor: measurement range 0-50KN, minimum frequency response 5KHz
2. Measurement accuracy: ± 1% within the full range
3. Impact mode: Free fall mode
4. Power supply: 220V 50Hz 2KW

Seat belt overall static load tester
1、 The main purpose of the static load tester for seat belts
The overall static load tester for seat belts is designed according to the new national standard for seat belts and is used to test the overall static load capacity of safety belts for pole work. Complies with GB/T6096-2009 "Test Methods for Safety Belts"

2、 Characteristics of Static Load Instruments
1. The force measurement system can directly display the tensile force value at that time, with clear display numbers.
2. Mobile time timer device, set an alarm reminder when the time is up, and the time device can be installed in one's preferred location according to one's own needs.
3. The lifting device is easy to operate.
4. Provide protective devices to effectively protect the safety of test personnel.
5. Unique design test rack, easy to assemble, can be used for on-site equipment assembly. The rack of this equipment is a static dedicated test rack. If customers have the need to install dynamic load testing, modifications can be made on this test rack.
6. Provide foundation drawings and technical support to facilitate customers in building foundations.

3、 Main technical indicators
1. Test force range: 0-20KN (can be configured according to requirements)
2. Stretching length range: 0-3000mm
3. Stretching speed: less than 100mm/min, self controlled