VIP member
Single phase multifunctional power meter XY194E-9S1
Measure all single-phase electrical parameters (current, voltage, active power, reactive power, power factor, frequency), active energy, reactive ener
Product details
Description of Single phase Multi functional Power Meter
Measure all single-phase electrical parameters (current, voltage, active power, reactive power, power factor, frequency), active energy, reactive energy, etc.
Standard RS485 interface, international standard Modbus rtu protocol, providing upper computer testing software, and engineering example programs for Kingview software.
Optional 2-channel relay output, can be set as electrical parameter alarm or remote control output.
Optional 1 analog output (DC0-20mA, DC4-20mA, DC0-5V, etc.) can be set to associate with any single-phase electrical parameter.
Technical parameters: 
RS485 communication module:
RS458 supports standard Modbus rtu protocol commands: 03H, 04H, 10H. Baud rate: 240048009600. Data format: 8-bit data bits, no checksum, 1-bit stop bit; 8-bit data bit, odd parity, 1-bit stop bit; 8-bit data bit, even check, 1-bit stop bit; 8 data bits, no checksum, 2 stop bits. The communication address, baud rate, and data format can be set through the instrument menu. All measured electrical parameters and parameter settings can be read out through the RS485 interface and can be connected to various PLCs, HMI， Configure software networking.
Relay output module:
Up to 2 relays can be selected, which can operate in alarm or remote control mode. When working in an alarm state, the relay is associated with one of the measured electrical parameters, and if it is lower or higher than the set alarm value, the relay will act; When working in remote control mode, the action of the 10H control relay is controlled by Modbus rtu commands through the RS485 interface.
Transmission output module:
Up to one analog transmission output function is provided, and each channel can select any one of the six electrical parameters as the transmission output item. Through the instrument's own transmission output function, the analog transmission output function of electrical parameters (0-20mA, 4-20mA, 0-10-20mA, or 4-12-20mA) can be achieved, and the corresponding relationship between the quantities can be set arbitrarily.
Wiring diagram:
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-