1、 Product Description
The OK-TS10 solar IoT insecticidal lamp is a physical control method that uses the phototaxis of pests for trapping and killing. Frequency vibrating insecticidal lamps utilize the strong phototaxis, wave attraction, color attraction, and sexual information of pests. The wavelength, band, and frequency of the light are set within a specific range, and light is used at close distances and waves are used at long distances. The sexual information generated by the attracted pests themselves is used to lure adult insects to pounce on the lamp. The lamp is equipped with a frequency vibrating high-voltage power grid for contact and killing, allowing pests to fall into the insect bag under the lamp, achieving the goal of killing pests. Widely used in agriculture, forestry, vegetables, warehousing, tea, tobacco, gardens, scenic spots, amusement parks, parks, schools, enterprises and institutions, greenhouses, vineyards, aquaculture, animal husbandry, etc.
1、 Functional Features
1. Complies with the national standard GB/24689.2-2017 for plant protection machinery frequency vibration insecticidal lamps.
2. Insecticidal net: It is connected with a stainless steel square vertical net, with a vertical wire diameter of 2mm. It is equipped with a power grid overcurrent short circuit protection device to prevent power grid short circuits caused by residual insect bodies.
3. Light control technology: Automatically turn on and off lights according to the alternation of day and night.
4. Rain control device: When the humidity is greater than 95% RH, the frequency vibration lamp can enter automatic protection mode. When the humidity is not greater than 95% RH, it can resume normal operation.
5. Time control module: Based on the behavioral patterns of target insects, 8 time control modes can be set.
6. Reverse polarity protection: It has a positive and negative pole accidental reverse polarity protection function to prevent damage to the lamp body caused by improper human operation.
7. Low temperature protection: When the air temperature is below about 5 degrees Celsius (with an error of ± 5%), the insecticidal lamp enters automatic sleep mode, which can increase the service life of the battery.
8. Battery protection: The control circuit is designed with automatic maintenance function for the battery to prevent overcharging and overdischarging from reducing the service life of the battery.
9. Status display: The blue LED indicator light above the insecticidal lamp body displays the working status of the photovoltaic and battery charging, while the red LED indicator light displays the working status and fault status, making it convenient for users to understand the operation of the entire lamp.
10. Wireless transmission module: Industrial grade design, using high-performance ultra-low power RF chips and high-speed microcontroller control, with ESD protection in the SIM card slot.
11. Through the platform, working hours can be remotely set and lights can be turned on and off. Each device can be located through GPS, displaying the distributed locations on the map, making it convenient for users to view and equipped with anti-theft functions.
12. Lamp pole height: 3 meters.
13. Control area: 40-60 acres.
2、 Technical parameters
1. Lure light source: frequency vibration lamp tube (365~680nm), with a service life of>50000 hours.
2. Frequency vibration light color: yellow; Insect bag: red
3. When the voltage of the lamp tube is 200-280V, the start-up time of the lamp tube is ≤ 5s
When the voltage of the lamp tube is 160-200V, the start-up time of the lamp tube is ≤ 15s
4. Power: ≤ 15W
5. Insulation resistance: ≥ 2.5M Ω
6. Impact area: ≥ 0.24 square meters.
7. Solar panel: monocrystalline silicon solar panel with a power of 40Wp.
8. Battery: DC12V/24Ah maintenance free gel battery
9. Grid voltage: ≥ 2300V
10. Packaging size: 320 × 320 × 710mm, net weight of lamp body: ≤ 4kg
11. Lamp body size: 300 × 300 × 630mm (excluding edge)
12. Design lifespan: ≥ 5 years
13. Insect bag size: 250 × 370 × 370mm






















