model; JY881

Specifications and dimensions, height 450, width 800, depth 5000MM

External dimensions, height 1600, width 1100, depth 6000MM "External dimensions can be changed"

The size of the feed inlet on the workbench is 500MM,

The size of the discharge port on the workbench is 500MM,,

There are small doors at the inlet and outlet that move up and down to prevent temperature leakage

Temperature parameters; 0~250

Common temperature; 0~130

High temperature; two hundred and fifty

Uniformity; When setting the 130 degree test, the temperature difference is plus or minus 2.5 degrees

Studio structure and materials;

Structure inside the tunnel; Air duct circulation to avoid dead corners in the temperature inside the box

Shell material; A3 cold plate 1.5 thick "Wuhan Baosteel"

Equipment color; Computer gray spray paint finish

Furnace materials; Inner liner made of stainless steel, corrosion-resistant, with a thickness of 1.5

Rack structure and materials;

Rack size; Height 500MM, width 800MM, heating zone 5000MM

material 5 # angle steel. Frame made of 6 # and 8 # square tubes and channel steel

Tray, pallet material; Main roller 800mm with gear diameter of 100-160MM and two rollers,

Rack support points; Four universal wheels with a load-bearing capacity of 1 ton and six wheels

Conveying materials and speed ratio; Stainless steel wire mesh and stainless steel round steel for conveyor chains,

Motor model and speed ratio; Variable frequency motor according to weight; 750W

Transmission speed; The frequency converter adjusts the speed,

Coating materials; The exterior is painted with dry paint, and colors can be selected

Thermal insulation materials; Aluminum silicate insulation cotton, thickness 80-130MM, good insulation performance

Cyclic mode; The circulation adopts air supply circulation, with good temperature uniformity, and the empty box does not exceed plus or minus 3 degrees

Blower motor; Two 750W blower motors and two centrifugal fan blades

Air intake system; Quantity 2, caliber 6MM,

Exhaust system; Installed on the top of the box, quantity 1, diameter 100MM, can be taken out of the workshop

Heating system;

Heating element; Adopting W-shaped stainless steel heating tube, stainless steel, heating time; Empty load at room temperature of 100 degrees, approximately 20MIN

Electrical system; 1. The main control instrument adopts Fuji Instrument from Japan

2. SCR thyristor

3. Other electrical components are sourced from Schneider and Omron brands

Temperature control, voltmeter

Intelligent temperature control instrument, PID function automatic temperature control, temperature control accuracy plus or minus 1 degree

Overtemperature protection: If the smart instrument is damaged, the overtemperature protection will automatically activate the second temperature control and protection

Three sets of ammeters for detecting whether the heating tube is damaged

time relay

1. Power switch and indicator light

2. Heating switch and indicator light

3. Blowing switch and indicator light

4. Alarm switch and indicator light

Measurement device; K-division thermometer, precise temperature measurement

Current and voltage; 380V，50HZ， three-phase four-wire

Electrical components; Adopting Chint Electric Appliances

Temperature control method; Automatic constant temperature control

safety system; Install emergency stop switches at both ends of the furnace body, with protective covers on both sides of the chain

Transportation method, truck transportation

Random attachments; One instruction manual, certificate of conformity, warranty form, "one-year warranty"

1. One copy of the instruction manual for random spare parts, one copy of the electrical component manual, one copy of the warranty certificate, and one copy of the certificate of conformity.

2. Warranty scope: The entire product is covered by a one-year warranty (excluding human damage), which includes all electrical components.

Our company can customize various non-standard models and sizes of electric heating equipment such as ovens, drying ovens, drying boxes, etc. according to customer requirements.

If the items you are baking contain volatile gases or corrosive substances, please explain in detail to our technical service personnel. If necessary, explosion-proof devices should be installed or corrosion-resistant materials should be used. Strictly prohibit baking explosive materials!

If you need more detailed parameter information and a single product quotation, please contact us

We will provide a response within 2 hours! Thank you for your interest in our product, and we look forward to working with you!