Introduction to Puhui brand transmission cap elastic seat sealing gate valve (RVCX/SZ45X-16):

　　Transmission cap elastic seat sealing gate valveAlso known as transmission cap underground elastic seat sealing gate valve or underground elastic seat sealing gate valve, it is designed and produced specifically for laying pipelines underground that require scientific and simple gate valves. The opening and closing of the Puhui transmission cap elastic seat sealing gate valve is simple, and the opening and closing force is very small. The specially designed transmission cap replaces the traditional handwheel, with a smaller volume, bringing great convenience to daily construction use.

Main parameters of RVCX/SZ45X transmission cap underground elastic seat sealing gate valve

Nominal pressure: 1.0MPa-1.6MPa-2.5MPa;

Specification caliber: DN40 to DN600;

Medium temperature: 0 to 80 degrees;

Applicable media: water, reclaimed water;

Connection form: flange;

Shell material: cast iron;

Flange standard: GB/T17241.6 GB/T9113；

Test standard: GB/T13927，Ap1598。

RVCX/SZ45XThe data that must be known when selecting the transmission cap elastic seat sealing gate valve

1. The main valve material of the transmission cap elastic seat sealing gate valve is gray cast iron and ductile iron, two options are available.
2. Work pressure standards, three options available: 10kg, 16kg, and 25kg.
3. Choose the caliber based on the inner diameter: the minimum caliber is available from DN40 to DN600.

What are the advantages and characteristics of the Puhui RVCX/SZ45X transmission cap elastic seat seal gate valve

The transmission cap elastic seat sealing gate valve is a replacement product for traditional handwheel gate valves. It utilizes the small space occupied by the transmission cap and the compensating effect of the elastic gate plate to achieve good sealing effect. It has significant advantages such as lightweight switching, reliable sealing, good elastic memory, and long service life. It can be widely used as a regulating and shut-off device in fluid pipelines such as tap water, sewage, construction, food, electricity, medicine, metallurgy, textile, energy systems, etc.

Pratt&Whitney RVCX/SZ45X Drive Cap Elastic Seat Sealing Gate Valve Features:

The transmission cap underground elastic seat sealing gate valve has a flat bottomed valve seat.
Traditional gate valves often accumulate in the groove at the bottom of the valve due to external objects such as stones, wooden blocks, cement, paper scraps, and debris after flushing the pipe with water. It is easy to cause leakage due to the inability to close tightly. The low part of the soft seal gate valve adopts the same flat bottom design as the water pipe, which is not easy to cause debris accumulation and ensures unobstructed fluid flow.
The underground elastic seat sealing gate valve of the transmission cap is fully encapsulated with rubber.
The valve plate is made of high-quality rubber for overall internal and external sealing, and the first-class rubber vulcanization technology in China ensures precise geometric dimensions of the vulcanized elastic seat sealed gate valve plate. And the rubber is firmly connected to the ductile iron gate, which is not easy to fall off and has good elastic memory.
The transmission cap elastic seat sealing gate valve has a corrosion-resistant and transport resistant precision cast valve body
The valve body is coated with powder foam epoxy resin, which can prevent corrosion and rust of the valve body and can be used in sewage systems; In the past, traditional cast iron gate valves often suffered from breakage caused by external objects hitting, colliding, or overlapping. Due to the use of ductile iron in this valve, this situation can be significantly reduced; The valve body is precision cast, and the precise geometric dimensions ensure the sealing of the valve without any need for precision machining inside the valve body.
Transmission cap elastic seat sealing gate valve with three "O" ring sealing ring
Due to the use of a three "0" ring sealing design for the valve stem, friction resistance during opening and closing can be reduced, significantly reducing water leakage. The sealing ring can be replaced during construction without stopping the water supply.
Helps with drinking.
Due to the non-toxic epoxy resin coating inside the valve body, the inner and outer surfaces of the gate are completely covered with rubber to prevent rust or corrosion, making it suitable for drinking.
Puhui Valve Transmission Cap Elastic Seat Sealing Gate Valve is a premium product that provides free installation solutions. We look forward to your call at 0317-8294124.

Transmission cap elastic seat sealing gate valve related products:Bright stem elastic seat sealing gate valve，Directly buried telescopic rod elastic seat sealing gate valve，Buried extended rod elastic seat sealing gate valve.