Product Introduction:

LZX600VOCsThe gas monitoring system is applied to various gas concentrations of VOCs emitted from flue gas emissions24Continuous online monitoring for hours

Measurement of temperature and humidity, on-site concentration display, over limit sound and light alarm, remote signal transmission. Using 3.5Inch high-definition color screen

Time display, using internationally renowned brand gas sensors, the main detection principles include: electrochemistry, infrared, catalytic combustion

Thermal conductivityPIDGas sensors based on principles such as photoionization and high-precision capacitive digital temperature and humidity sensors from Switzerland. Advanced electricity

Road design, mature kernel algorithm processing, unique appearance design, and have obtained multiple software copyrights and appearance patents.

LZX600Suitable for detecting gas concentration in pipelines, confined spaces, and atmospheric environments,Pipeline natural gas leakage alarm.

Detection types exceed500Other types. Durable explosion-proof casing and fluorocarbon paint surface treatment process suitable for various hazardous locations

In highly corrosive environments, it is wear-resistant.

This instrument adopts a pump suction sampling method, which can be directly connected to gas outlet pipelines such as flue gas ducts. The gas entering the instrument passes through a trap and is then removed
Drying and filtering are carried out using units such as dehumidifiers and flow meters. Finally, entering the intelligent PID organic gas detector, advanced spectroscopic technology is used to measure the gas content
The concentration of VOCs.

The entire system consists of three subsystems: monitoring the concentration of gaseous pollutants VOCs, wireless transmission, and data acquisition. It has a simple structure and a wide dynamic range,
Strong real-time performance, flexible networking, and low operating costs. The system adopts a modular structure, which is easy to combine and can be integrated with the DCS and environmental protection departments within the enterprise
According to system communication.

PID is a type of photoionization detector mainly used to detect concentrations in

Low concentration volatile organic compounds and other toxic gases in the order of 1ppb-15000ppm. PID is a highly sensitive and widely applicable detector.

PID uses a ultraviolet (UV) light source to ionize organic molecules into positive and negative ions that can be detected by a detector (ionization). The detector captures
The positive and negative charges of ionized gas are converted into electrical signals to measure gas concentration. When the gas to be tested absorbs high-energy ultraviolet light
Molecules temporarily lose electrons and become positively charged ions when excited by ultraviolet light. After being detected on the electrode of the detector, gas ions quickly combine with electrons and recombine
Newly form the original gas and vapor molecules. PID is a non-destructive detector that does not "burn" or permanently alter the gas molecules being measured
The gas detected by PID can still be collected for further measurement.

adopt3.5Real time display of inch high-definition color screen
Can detect simultaneously1～16Gas species
Optional units:PPM、mg/m3、Vol%、LEL%、PPHM、ppb、mg/L
Real time monitoring can be achieved through wired or wireless remote transmission, network transmission; standard busRS485（modbus-RTU）And 4～20mASimultaneously output standard signals; Optional frequency output200-1000Hz、HartProtocol signal1～5VOutput Wireless transmission（2～5Kilometers or unlimited distance); Compatible with secondary instruments

Table, data collection modulePLC、DCSThe system can drive related devices.