VIP member
Vertical combustion tester for automotive interior materials
GB32086-2015 Technical Requirements and Test Methods for Vertical Combustion Characteristics of Specific Types of Automotive Interior Materials. The T
Product details
TG-3025AGB32086-2015 Combustion Chamber Combustion Characteristics Tester for Specific Types of Automotive Interior Materials.
The vertical combustion tester is based on the standard: Shanghai Taigui Testing Equipment Co., Ltd. The vertical combustion tester is based on the European Union Automotive Technical Directive95/28//ECCombustion characteristics of specific types of automotive interior materials; And national standardsGB32086-2015Technical requirements and test methods for vertical combustion characteristics of specific types of automotive interior materials.
TG-3025AThe vertical combustion tester is suitable for evaluating the horizontal combustion characteristics of interior materials in automobiles (sedans, multi-purpose passenger cars, trucks, and buses).
GB32086-2015Technical requirements and test methods for vertical combustion characteristics of specific types of automotive interior materials2016year7moon1Officially implemented according to the national standards of the People's Republic of China2015Year's Day31Announcement of National StandardsGB 32086-2015Technical Requirements and Test Methods for Vertical Combustion Characteristics of Specific Types of Automotive Interior Materials2016year07moon01Starting from the day of implementation.
GB32086-2015The standard adopts the method of redrafting and is modified to comply with the EU Automotive Technical Directive95/28/ECAppendix of "Combustion Characteristics of Specific Types of Automotive Interior Materials"VI, with95/28/ECAttachmentVIThere are four main differences: the use of pressure plates has been added to ensure that the style is vertical and flat/In the gas requirements, liquefied petroleum gas and sample sampling methods as well as result representation methods have been added. National StandardGB 32086-2015第3Chapter, Chapter4Chapters are mandatory, while others are recommended. According to itGB/T1.1—2009The drafting of the given rules was proposed by the Ministry of Industry and Information Technology of the People's Republic of China and by the National Automotive Standardization Technical Committee(SAC/TC114)Centralized management. National StandardGB32086-2015Main drafting unit:China Diyi Automotive Group Corporation Technology Center
Introduction to Technical Parameters of Vertical Combustion Tester for Automotive Interior Materials:
Control method |
The wind speed in the experimental environment can be controlled vertically after determining the position of the combustion chamber0.1m/s~0.3m/s |
Temperature measurement inside the combustion chamber |
Temperature measurement range0℃～90℃； precision0.1℃ |
Flame application timing |
Manual button control timing; Control range:0.1s-99min99sTiming accuracy0.1s |
flame height |
adjustable10-100mm |
Sample combustion time timer |
Manual button control timing; Measurement range:0.1s-99min99sTiming accuracy0.1s |
Size of fume hood |
about2000（W）×900（D）×2600（H）The capacity of the fume hood is equivalent to that of the combustion chamber20-110The length, width, and height of the product shall not exceed the other two dimensions2.5times |
Material and steel plate thickness of fume hood |
Steel;2mm |
Sample fixture size |
Framework high560 mmThe distance between two is150 mmThe parallel rods are connected to form a fixed needle with a fixed sample on the rod. The diameter of the fixed needle is not greater than2 mmAt least in length27 mmTo fix the sample on the fixed needle and maintain a distance from the frame, a diameter of ____ needs to be installed near the fixed needle2 mmThe height should be at least20 mmThe positioning column |
pressure plate |
UThe thickness of the pressure plate is1.0 mm±0.1 mm |
Gas lamp |
The inner diameter of the gas nozzle is0.18+0.03 0 mmThe center of its lamp mouth is located below the center of the free end of the sample20mmIt can be automatically ignited at the location |
gas |
Industrial propane gas, butane gas or liquefied petroleum gas |
Equipped with steel ruler |
Steel ruler range600 mmAbove, the accuracy is1 mm |
Overall dimensions |
1120mm*520mm*1250mm |
power supply |
communication/single-phase 220（1±10%）V/50Hz |
Advantages of Vertical Combustion Tester for Automotive Interior Materials:
1: Display mode
True color instrument digital display records data
2: Control mode
Dustproof button operation.
3Introduction to Box Process
The box adopts1.5The inner and outer layers of the cold plate are coated with high-end paint, and the box is treated with anti-corrosion to solve the problem of box decay.
4: fume hood
The equipment comes with a built-in fume hood and adjustable wind speed0.10m/s-0.30m/sAny numerical value, automatic smoke exhaust upon completion of the experiment.
5:Product Design:
Vertical combustion tester The experimental and control parts are designed to be integrated
6: Ignition control
Equipped with automatic ignition function, temperature and time digital display, easy observation and recording, stable and reliable use.
Design standards:
GB 32086-2015Technical requirements and test methods for vertical combustion characteristics of specific types of automotive interior materials
Compliant with: European Union Automotive Technology Directive95/28//ECVertical section of "Combustion characteristics of specific types of automotive interior materials"
ECE-R118 ANNEX 8Manufacturing of automotive material combustion tests and other standard manufacturing as required by China
JT/T1095-2016Flame retardant characteristics of interior materials for commercial busesGB32086Required experimental section
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-