1： Introduction and Application

The mixer is mainly used for those with large chemical reactions, few solutions, fast solution uniformity speed, and can only be used for uniformity in test tubes, closed tubes, and small and medium-sized three legged bottles, providing an ideal equipment. This instrument not only solves the problem that cannot be solved by mixers, but also saves a lot of labor, and the use effect is quite obvious.

2： Technical parameters

electricity Source: communication50HZ 220V±20V

Vibration frequency:0-2800rmp, stepless speed regulation

Motor power: 60W

prepare note: Rubber head

3： Instructions for use

1. To ensure personal safety, proper grounding is necessary during use.

2. Please read the instruction manual carefully before using the instrument for the first time.

3. If not used for a long time, the power should be cut off.

4. When using test tubes and colorimetric tubes, less than half of the solution is *.

5. When using, do not apply too much force and be sure to be in the center position.

4： Operation steps

1. Plug in the power plug and turn on the power.

2. Adjust the required speed according to the experimental requirements, and the instrument will start working.

3. Specific operation: Hold the test tube clamp and gently press the bottom of the test tube onto the working surface of the instrument. Depending on the pressure of the hand, the solution in the test tube can be evenly distributed quickly or slowly.

4. At the end of use, turn off the power.