VIP member
WLB-10KN Electronic Pulling Instrument
Inspection shall be carried out in accordance with the requirements of the "Inspection Standard for Bonding Strength of Decorative Bricks in Building
Product details
1、 A brief explanation of the electronic drawing tester:
In order to strengthen the control of the bonding quality of decorative bricks and ensure the quality of the project, the Ministry of Construction of the People's Republic of China issued the mandatory industry standard "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering" (JG110-2008) on March 12, 2008, which was implemented from August 1, 2008. Among them, Articles 3.0.2 and 3.0.5 are mandatory provisions that must be strictly enforced. The original industry standard "Inspection Standard for Bonding Strength of Decorative Bricks in Building Engineering" JGJ110-97 is simultaneously abolished. In the approved industry standard of the People's Republic of China, "Code for Construction and Acceptance of Brick Engineering for Exterior Wall Decorative Bricks", the bonding strength of exterior wall decorative bricks must be in accordance with《Inspection standard for bonding strength of decorative tiles in construction engineering》（JG110-2008）The requirements for inspection shall be carried out, and the inspection results shall be used as the data for engineering acceptance.
2、 Technical parameters of electronic drawing machine:
1. Maximum experimental force: 5000N
2. Load resolution: 0.1N
3. Effective detection range: 1% -100% of maximum experimental force
4. Load measurement accuracy: within ± 0.5% of the displayed value
5. Pulling method: Multiple control methods such as force control and displacement control are available
6. Drawing speed range: 0.1mm-300mm/min
7. Test piece width range: 70-500mm
8. Maximum thickness of specimen: 50mm
9. Maximum travel of test head: 100mm
10. Host dimensions: 700 X 700 X 730mm ³
11. Card head form: articulated T-shaped card head
3、 Main configuration of electronic drawing machine:
1. One main unit (pull-out testing machine)
2. A set of Panasonic servo motors and controllers from Japan
3. LCD digital display control cartridge curve display, automatic strength calculation, professional software configuration, can be connected to a computer for operation, data storage, report editing, printing in WORD, PDF and other formats, or can be used separately.
4. One 5000N tension sensor
5. Test the first one
6. 10 test accessories
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-