Will stainless steel water tanks deform? Generally, stainless steel does not deform, but plans cannot keep up with changes, and some accidents may occur before and after the installation of the water tank, causing deformation of the stainless steel water tank. In order to reduce the possibility of deformation of stainless steel water tanks, I will summarize a few points to pay attention to, hoping to help everyone. The reason for the deformation of the water tank is generally due to the deformation of the water tank plate, as well as inadequate installation technology and untimely maintenance in the later stage. Next, Xiaowo will explain based on these aspects. 1. The water tank plate does not deform: On the premise of the quality of the raw materials, the possibility of deformation caused by transportation to the plate should be minimized as much as possible. When loading, the plate should be tied up to avoid friction and collision caused by transportation bumps. In addition, partition paper film can be added between the water tank plates to reduce collision and friction between them. When unloading, the worker should handle it gently to avoid deformation of the water tank panel caused by impact; Avoid excessive accumulation before leaving the factory, which may cause deformation of the water tank plate; 2. Installation technique: When tightening screws; The strength should be moderate, and the welding current should not be too high, which can easily cause large areas of plate deformation due to heat. Before installation, it is necessary to check whether the plate has been deformed. If a small amount of deformation has occurred, it can be corrected and shaped. If the deformation is too severe or even cracks occur, it needs to be replaced. 3. After installation, users should conduct regular inspections to avoid placing heavy objects above the stainless steel water tank to prevent deformation. It should be avoided to collide with stainless steel water tanks, as collisions can cause deformation or cracking