VIP member
XR80Y series universal strain gauge pressure transmitter
Brief introduction: The XR80Y series universal strain gauge pressure transmitter has undergone precise temperature compensation, all stainless steel s
Product details
Brief introduction:
The XR80Y series universal strain gauge pressure transmitter is characterized by high precision, high anti-interference, strong overload and impact resistance, good moisture resistance, and long-term stability through precise temperature compensation, all stainless steel sealed welding structure, and perfect assembly technology. The XR80Y series universal strain gauge pressure transmitter is equipped with multiple medium interfaces for customers to choose from, which can measure the absolute pressure, gauge pressure, and differential pressure of gases and liquids. It is widely used in automatic control fields such as metallurgy, aviation, aerospace, petrochemicals, etc.
Details introduction:
XR80Y series universal strain gauge pressure transmitter
Characteristics of XR80Y series universal strain gauge pressure transmitter
*Adopting strain type patch pressure sensitive components*Contact with liquid components using316Made of stainless steel
*Applicable * High85Medium and ambient temperature of ℃*Various types of pressure and electrical connections
*All standard output signals:0-5V；0.5-4.5V；1-5V；**High100V/mofEMCProtection capability
0-10V；4-20mAreach10-90℅Ratio voltage
Technical parameters of XR80Y series universal strain gauge pressure transmitter:
1.performance
|
range |
500KPa～250MPa |
|
|
Allow overvoltage |
2Double Full Scale |
After removing the overpressure pressure, all performance remains unchanged (destructive pressure) power10Multiple Full Scale Pressure |
|
Accuracy (including nonlinearity, hysteresis, and repeatability) |
0.2﹪FS;0.5﹪FS;optional |
|
|
offset thermal drift |
less than0.01﹪FS/℃ |
|
|
Thermal drift |
less than0.01﹪FS/℃ |
|
|
response time |
greater than0.5ms |
|
|
durability |
＞107Secondary full pressure cycle |
|
2. XR80Y series universal strain gauge pressure transmitterElectrical Rules
|
Nominal output signal |
4-20mA(Two lines) |
0-5V,0.5-4.5V,1-5V |
0-10V |
10-90℅ratio |
|
Supply Voltage |
8-36V |
8-36V |
12-36V |
5V±0.5V |
|
Output Impedance |
- |
less than90 |
less than90 |
less than90 |
|
load |
0-1000 |
greater than10K |
greater than10K |
greater than5K |
3. XR80Y series universal strain gauge pressure transmitterenvironmental condition
|
Medium temperature range |
-20～85℃ |
|
Temperature range |
Refer to section25page |
|
Compensed Temperature Range |
-20～85℃ |
|
Transportation temperature range |
-20～85℃ |
|
Magnetic field influence |
Strength in400A/mthe following50HZThe output error caused by AC or DC magnetic fields acting on any axis of the transmitter can be ignored. |
|
RFIeffect |
The frequency is10KHZ~100MHZThe strength is30V/m(unshielded cable)10V/m）The following RF interference, acting on any axis of the transmitter, causes an output error smaller than the calibrated range+0.1% |
|
vibration effect |
Vibration frequency20~2000HZ, amplitude2mmAcceleration6g,existx,y,zVibration in any axial direction, every direction3minZero point output changes to * large range+0.1% |
|
protection grade |
Refer to section25Page (related to the selected electrical connection components) |
4. XR80Y series universal strain gauge pressure transmittermechanical condition
|
material |
Contact with liquid components |
316stainless steel |
|
degrees of protection provided by enclosure |
1Cr18Ni19TiOr plastic |
|
|
Pressure connection |
316stainless steel |
|
|
Electrical connection |
Refer to section25page |
5. XR80Y series universal strain gauge pressure transmittersize/combination
|
Electrical connection drawings |
M12*1 |
Hessman connector |
||
|
|
|
|||
|
Pressure connection drawing |
M20*1.5 |
G1/4 |
M12*1.5 |
G1/4EDseal |
|
|
|
|
|
|
*If you need any other requirements, please negotiate with the company.
*Example diagram of size combination:
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-