VIP member
YJBA-500L fully automatic single station blow molding machine
Scope of application:
Product details
YJBA-500L fully automatic dual stationblow molding machinePerformance characteristics:
YJBA-500L fully automatic single station blow molding machine is a fully automatic energy-saving blow molding machine equipped with a 35L storage type die head;
Suitable for producing products with a capacity of less than 500L, such as large three hole water horses, enclosures, amusement facilities, etc.
Specially designed four cylinder non pull rod locking structure, firmly locking the mold, not easy to expand the mold, and increasing the strength of the product at the joint line.
The number of locking cylinders can be increased according to the size of the product volume;
The blow molding machine adopts high-quality linear guide rails, with fast opening and closing speed, low energy consumption, and long equipment service life.
Technical parameters of YJBA-500L fully automatic single station blow molding machine equipment:
| YJBA-500L fully automatic single station blow molding machineTechnical Specifications | UNIT | YJBA-500L |
| Maximum product volume | L | 500 |
| Applicable raw materials | - | PE |
| idle loop | PCS/H | 220 |
| screw diameter | mm | 120 |
| screw length-to-diameter ratio | L/D | 32 |
| Screw motor power | Kw | 110/132 |
| Screw heating power | Kw | 36 |
| Number of screw heating sections | Zone | 6 |
| HDPE extrusion volume | Kg/h | 280-350 |
| Oil pump motor power | Kw | 37 |
| Locking force | Kn | 1200 |
| Opening and closing stroke of the mold | mm | 960-2260 |
| Template size | W×H(mm) | 1300×1800 |
| Maximum size of mold | W×H(mm) | 1100×1800 |
| Type of mold head | Accumulator die head | |
| Storage capacity | L | 35 |
| Maximum die diameter | mm | 650 |
| Heating power of mold head | Kw | 46 |
| Number of heating sections | Zone | 4 |
| blowing pressure | Mpa | 0.6 |
| Gas consumption | M3/Min | 2.5 |
| cooling water pressure | Mpa | 0.3 |
| water consumption | L/Min | 3000 |
| Machine dimensions | L×W×H(M) | 8.8×3.6×5.6 |
| machine weight | Ton | 45 |
Due to the continuous advancement of blow molding equipment technology, the above data may be updated without prior notice!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-