YJH60-5L fully automatic single stationblow molding machineIntroduction:

YJH60-5L fully automatic single station blow molding machine is used to spray liquid plastic out, and then use the wind force blown out by the machine to attach the plastic body to a certain shape of mold cavity, thereby producing products. The fully automatic blow molding machine can blow hollow containers with a capacity ranging from 1L to 5L using thermoplastic materials such as PE and PP as raw materials, such as cosmetic containers, beverage containers, etc. Blow molding machine equipment is fully automated in production, with high energy saving, low noise, fast speed, high efficiency, safety and reliability.

Technical parameters of YJH60-5L fully automatic single station blow molding machine equipment:

Technical Specifications	UNIT	YJH60-5L
Maximum product volume	L	5
workstation count	-	Single
Applicable raw materials	-	PE,PP
idle loop	PCS/H	1100
screw diameter	MM	60
screw length-to-diameter ratio	L/D	25
Screw motor power	KW	15
Screw heating power	KW	8.1
Number of screw heating sections	ZONE	3
HDPE extrusion volume	KG/H	60
Oil pump motor power	KW	7.5
clamping force	KN	70
Move mold stroke	MM	420
Type of mold head	Continue Die Head
Opening and closing stroke of the mold	MM	220-700
Template size	W x H(MM)	350 x 425
Maximum size of mold	W x H(MM)	350 x 425
Maximum die diameter	MM	150
Heating power of mold head	KW	2.5
Number of heating sections	ZONE	3
blowing pressure	MPA	0.6
Gas consumption	M3/MIN	0.5
cooling water pressure	MPA	0.3
water consumption	L/MIN	50
Machine dimensions	L x W x H(M)	3.0 x 1.7 x 2.5
machine weight	TON	4.8

Due to the continuous advancement of blow molding machine equipment technology, the above data may be updated without prior notice!