VIP member
YJHT70-15L/1-L fully automatic single station blow molding equipment
Scope of application:
Product details
YJHT70-15L/1-L fully automatic single station blow molding equipment performance characteristics:
YJHT70-15L/1-L fully automatic single station blow molding equipment is a single station servo high-speed model.
Suitable for producing 5-15L of various lubricating oil drums, chemical drums and other products.
Production line automation: Automatic trimming and online completion. High efficiency ratio, greatly reducing the number of workers required.
The finished product can be connected to a leak detection machine to achieve automation of the entire production process, effectively reducing production costs.
The blow molding machine can replace different multi-mode heads and produce various hollow products of 500ML-5L, with higher output.
YJHT70-15L/1-L fully automatic single station blow molding equipment technical parameters:
| YJHT70-15L/1-L fully automatic single station blow molding equipmentTechnical Specifications | UNIT | YJHT70-15L/1-L |
| Applicable raw materials | - | PE, PP |
| workstation count | - | Single |
| Maximum product volume | L | 15 |
| idle loop | PCS/H | 900 |
| Main screw diameter | MM | 70 |
| Main screw length to diameter ratio | L/D | 25 |
| Main screw motor power | KW | 22/30 |
| Main screw heating power | KW | 3.6*3 |
| Number of main screw heating sections | ZONE | 3 |
| Liquid level line screw diameter | MM | 25 |
| Liquid level line screw length to diameter ratio | L/D | 22 |
| Level line screw motor power | KW | 1.5 |
| Heating power of liquid level line screw | KW | 0.45*4 |
| Number of liquid level line screw heating sections | ZONE | 4 |
| HDPE extrusion volume | KG/H | 70-85 |
| Power of servo oil pump motor | KW | 22 |
| clamping force | KN | 144 |
| Opening and closing stroke of the mold | MM | 280-750 |
| Move mold stroke | MM | 620 |
| Template size | MM | (W*H) 650*540 |
| Maximum size of mold | MM | (W*H) 650*450 |
| Mold thickness range | MM | 300-340 |
| Maximum die diameter | MM | 230 |
| Heating power of mold head | KW | 3 |
| Number of heating sections for the mold head | ZONE | 4 |
| blowing pressure | MPA | 0.6 |
| Gas consumption | M3/MIN | 0.8 |
| cooling water pressure | MPA | 0.3 |
| water consumption | L/MIN | 60 |
| Machine dimensions | M | (L*W*H) 3.8X2.1X2.8 |
| machine weight | T | 8 |
| installed capacity | KW | 64 |
| Average energy consumption | KW/H | 31 |
becauseblow molding machineThe equipment technology is constantly advancing, and any updates to the above data will not be notified separately!
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-