VIP member
Product details
There is a WeChat QR code below the homepage of the official website. Adding a QR code allows you to watch device videos
Introduction to Spiral Stone Washing Machine:
XLThe series of sand and gravel washing machines (spiral washing machines) can clean and separate soil and debris from sand and gravel. Its novel sealing structure, adjustable overflow weir plate, and reliable transmission device ensure the effectiveness of cleaning and dewatering. Spiral stone washing machines are widely used in industries such as highways, hydropower, and construction for washing, grading, and impurity removal, as well as for washing fine-grained and coarse-grained materials. They are particularly suitable for sand and stone used in construction and road building.
Working principle of spiral stone washing machine:
The machine rotor adopts a central structure, with spiral blades installed on the central shaft and connected to the central shaft by a reducer for operation. A device for mechanical classification based on the principle that solid particles have different densities and therefore different settling speeds in liquids.
Installation of Spiral Stone Washing Machine:
1. After the stone washing machine is transported, the user unit should immediately check whether all components are complete and whether there is any damage. Installation can only proceed after confirming that the machine is intact and undamaged.
2. The user unit should design the foundation construction drawing of the stone washing machine according to the specific situation on site, and install the stone washing machine firmly on a solid concrete foundation.
3. During installation, the machine must be installed at a tilt angle according to the requirements of the installation diagram.
4. The motor is installed on the guide rail to adjust the tightness of the belt, and the pulley and motor pulley should be parallel during installation.
5. After adjusting according to the above requirements, rotate the rotor disc a few times to check for any jamming or collision.
Precautions for using spiral stone washing machine:
1Before starting the spiral stone washing machine, first check whether the rolling of the spiral body is sensitive. You can roll it a few times by hand to check the rolling condition of the spiral body, and then check whether there are foreign objects in the ore tank of the spiral stone washing machine.
2After starting the machine, pay attention to whether the direction of rotation of the motor and screw is correct, and it is forbidden to add materials with particle size exceeding the specified requirements.
3When the spiral stone washing machine needs maintenance and cleaning work, the machine should be turned off. When the machine is running, maintenance is strictly prohibited. If it is necessary to stop the operation, it is necessary to stop the machine work according to the correct shutdown sequence, and finally clean up the residual materials inside the machine for the next no-load start.
Technical parameters of single spiral stone washing machine:
| Specification Model | XS0745 | XS1054 | XS1254 | XS1554 | |
| spiral diameter | 750 | 1000 | 1200 | 1500 | |
| Spiral length | 4500 | 5400 | 5400 | 5400 | |
| rpm | 18 | 18 | 16 | 16 | |
| Output (t/h) | 30-40 | 40-60 | 60-80 | 80-100 | |
| electromotor | 7.5 | 11 | 15 | 22 | |
| appearance size |
Length (m) | 6.6 | 7.5 | 7.6 | 7.6 |
| Width (m) | 0.8 | 1.25 | 1.44 | 1.85 | |
| Height (m) | 1.4 | 2.2 | 2.2 | 2.2 | |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-